Praca dyplomowa
About the Praca dyplomowa PCB
Praca dyplomowa is an open source PCB design by olagd, published on GitHub. It is a 2-layer board measuring 220 × 150 mm, with 161 components from 51 distinct parts.
Other key parts include the DS18B20+, M24C02-WMN6TP, FT232RNL-TUBE, MCP3202-CI/MS and MCP4921-E/P. By type, the board carries 52 resistors, 42 connectors, 16 LEDs, 13 switches, 13 capacitors and 7 transistors.
Main components on the Praca dyplomowa
Praca dyplomowa bill of materials (BOM)
161 components, 51 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS18B20+ | TO-92L_Inline_Wide | IC1 |
| 1 | M24C02-WMN6TP | SOIC-8_3.9x4.9mm_P1.27mm | IC2 |
| 1 | FT232RNL-TUBE | SOP65P780X200-28N | IC3 |
| 1 | MCP3202-CI/MS MCP3202 | DIP-8_W7.62mm_Socket_LongPads | IC4 |
| 1 | MCP4921-E/P MCP4921-E_P | DIP-8_W7.62mm_Socket_LongPads | IC5 |
| 1 | PCF8563TS | TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | BSS123 | SOT-23_Handsoldering | Q1 |
| 2 | SS8050-L | SOT-23_Handsoldering | Q2, Q7 |
| 4 | SS8550-L | SOT-23_Handsoldering | Q3, Q4, Q5, Q6 |
| 1 | 32.768kHz | Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Y1 |
| 4 | Conn_02x20_Counter_Clockwise | PinHeader_2x20_P2.54mm_Vertical | J1, J13, J14, J20 |
| 4 | Conn_01x20_Socket | PinSocket_1x20_P2.54mm_Vertical | J2, J3, J15, J16 |
| 3 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J4, J5, J6 |
| 4 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J7, J8, J17, J18 |
| 3 | Conn_01x05 | PinHeader_1x10_P2.54mm_Vertical | J10, J11, J12 |
| 3 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J21, J30, J31 |
| 3 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J22, J23, J25 |
| 2 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J24, J28 |
| 1 | Conn_01x02_Pin | PinHeader_2x02_P2.54mm_Vertical | J26 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | J27 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 112J-TDAR-R01 | 112JTDARR01 | J29 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J32 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J33 |
| 3 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J34, J37, J39 |
| 5 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J35, J36, J38, J42, J43 |
| 1 | Conn_01x16_Socket | PinSocket_1x16_P2.54mm_Vertical | J40 |
| 1 | Conn_02x07_Odd_Even | PinHeader_2x07_P2.54mm_Vertical | J41 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J44 |
| 1 | HC28010-D | hc28010-d | DS1 |
| 1 | CA56-21SURKWA | wyswietlacz7x4 | DS2 |
| 1 | BMT0905XH05 UGCM0903XP4.5IC | BMT0905XH05 | LS1 |
| 1 | 10K | PT6KV251A2020 | RV1 |
| 3 | CL-SB-12C-01 | JS102011CQN | S1, S3, S5 |
| 10 | 1301.9319 | SW_PUSH_6mm_H9.5mm | S2, S4, S6, S7, S8, S9, S10, S11 +2 |
| 2 | PT6KV-251A2020 PT6KV-103A20-PM | PT6KV251A2020 | VR1, VR2 |
| 10 | VLMTG1300-GS08 green | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1, LED2, LED3, LED4, LED6, LED8, LED10, LED12 +2 |
| 1 | ASMT-YTB2-0BB02 | ASMT-YTC7-0AA02 | LED5 |
| 5 | LS Q976-NR-1 red | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED7, LED9, LED11, LED13, LED15 |
| 5 | VS-10BQ015-M3/5BT | D_SMB_Handsoldering | D1, D2, D3, D4, D5 |
| 12 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5, C6, C7, C8, C9 +4 |
| 1 | 10p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 17 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R23, R24, R25, R29, R30 +9 |
| 1 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 9 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R11, R12, R39, R40, R41 +1 |
| 3 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R20, R51 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 8 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R13, R14, R15, R16, R17, R18, R19 |
| 2 | 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22 |
| 8 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R43, R45, R46, R47, R48, R49, R50 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R27, R28 |
| 1 | 50 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R52 |
Praca dyplomowa design files
The KiCad project lives in the olagd/praca_dyplomowa repository on GitHub; these links point at the commit this page was built from.
- Layoutboard_src/board.kicad_pcb
- Schematicboard_src/board.kicad_sch
Praca dyplomowa: common questions
How big is the Praca dyplomowa PCB?
The Praca dyplomowa measures 220 × 150 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Praca dyplomowa?
161 components, from 51 distinct parts. The full bill of materials is listed on this page.
Where can I download the Praca dyplomowa design files?
From the olagd/praca_dyplomowa repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Praca dyplomowa design in my own project?
The repository has no license, so all rights stay with olagd. Use it as a reference, and ask the author before reusing the design.