9 open source boards using the M24C02-WMN6TP
Real designs built with the M24C02-WMN6TP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
H616 devboard
Kononenko-K
58 × 66 mm161 parts4LCERN-OHL-P-2.039RP2040/RP2350
Core16 LB
ageppert
88.9 × 50.8 mm124 parts2LNo license5R2022-12
karlp
100 × 80 mm134 parts4LNo license3ESP32
OLD ENGG3800-g15
JoshCrouch
127.2 × 117 mm205 parts2LNo license0Praca dyplomowa
olagd
220 × 150 mm161 parts2LNo license0RP2040/RP2350
Core16 Test Fixture
ageppert
88.9 × 128.3 mm19 parts2LNo license5R2022-10
karlp
100 × 80 mm133 parts4LNo license3ESP32
ENGG3800-g15
JoshCrouch
101.9 × 109.5 mm182 parts2LNo license0Hubbish rev2
karlp
100 × 80 mm126 parts4LNo license3
How designs wire the M24C02-WMN6TP
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the M24C02-WMN6TP connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 2.2 µF).
- The E0 pin is tied to GND on 4 of 5 designs.
- The E1 pin is tied to GND on 4 of 5 designs.
- The E2 pin is tied to GND on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| E0pin 1 | Connected to: GND 80% · 3.3V 20% | — |
| E1pin 2 | Connected to: GND 80% · 3.3V 20% | — |
| E2pin 3 | Connected to: GND 80% · 3.3V 20% | — |
| VSSpin 4 | Connected to: GND 80% · a signal 20% | — |
| SDApin 5 | Connected to: A connector 60% |
|
| SCLpin 6 | Connected to: A connector 60% |
|
| WCpin 7 | Connected to: GND 60% · a signal 40% | — |
| VCCpin 8 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include H616 devboard by Kononenko-K, Core16 LB by ageppert, Hubbish rev2 by karlp and ENGG3800-g15 by JoshCrouch.
The M24C02-WMN6TP in open source designs
The gallery holds 9 open source boards using the M24C02-WMN6TP from 5 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 134 components.
56% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is H616 devboard by Kononenko-K.
Microcontrollers on boards using the M24C02-WMN6TP
What boards using the M24C02-WMN6TP are built for
M24C02-WMN6TP: common questions
Where can I find a M24C02-WMN6TP reference design?
Each of the 9 boards on this page is a real design using the M24C02-WMN6TP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the M24C02-WMN6TP VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the M24C02-WMN6TP.
How is the M24C02-WMN6TP E0 pin connected?
The E0 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the M24C02-WMN6TP.
How is the M24C02-WMN6TP E1 pin connected?
The E1 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the M24C02-WMN6TP.
Which microcontrollers do boards using the M24C02-WMN6TP use?
Most are built on ESP32 (2), RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the M24C02-WMN6TP?
The median is 100 × 80 mm, and 56% are two-layer designs.
What is the most popular open source board using the M24C02-WMN6TP?
By GitHub stars, H616 devboard by Kononenko-K, with 39 stars.
Can I simulate one of these boards using the M24C02-WMN6TP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.