555 Badge
onismond·555_Badge
About the 555 Badge PCB
555 Badge is an open source PCB design by onismond, published on GitHub. It is a 2-layer board measuring 53.9 × 85.6 mm, with 14 components from 12 distinct parts.
Other key parts include the NE555P. By type, the board carries 6 resistors, 2 diodes, 2 capacitors, 1 IC, 1 transistor and 1 switch.
It belongs with the wearables designs in this gallery.
Main components on the 555 Badge
555 Badge bill of materials (BOM)
14 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | 2N3904 | TO-92-3 | Q1 |
| 1 | BS-7 MPD (Memory Protection Devices) | Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 1 | EG1218 E-Switch | Switch_Slide_11.6x4mm_EG1218 | S1 |
| 2 | RED | LED_D5.0mm | D1, D2 |
| 1 | 10UF 10uF | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 100UF 100uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 22K 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 330K 330k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
555 Badge design files
The KiCad project lives in the onismond/555_Badge repository on GitHub; these links point at the commit this page was built from.
- Layout555_Badge.kicad_pcb
- Schematic555_Badge.kicad_sch
- BOM555_Badge_bom.xlsx
555 Badge: common questions
How big is the 555 Badge PCB?
The 555 Badge measures 53.9 × 85.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 555 Badge?
14 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 555 Badge design files?
From the onismond/555_Badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 555 Badge design in my own project?
The repository has no license, so all rights stay with onismond. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k