HardLabs

UP1-Progger

OpenKNX·OpenKNX-UP1·hardware/EDA-Files/UP1-Progger/UP1-Progger.kicad_pcb

UP1-Progger PCB layout, top view — open source board by OpenKNX

About the UP1-Progger PCB

UP1-Progger is an open source PCB design by OpenKNX, published on GitHub. It is a 2-layer board measuring 30 × 30 mm, with 17 components from 14 distinct parts.

Other key parts include the LDO_3V3_SOT23-3. By type, the board carries 4 connectors, 4 resistors, 3 switches, 2 LEDs, 2 capacitors and 1 IC.

From the project

OpenKNX system UP1

Main components on the UP1-Progger

LDO_3V3_SOT23-3

UP1-Progger bill of materials (BOM)

17 components, 14 distinct parts.

QtyPartRefs
1
LDO_3V3_SOT23-3
U1
1
TYPE-C_16PIN_2MD(073)
J1
1
SWD_Interface
J4
1
UP1_Prog_125
J10
1
UP1_Prog_10
J11
1
Reset
SW1
1
Bootsel
SW2
1
SW_SPDT
SW3
1
USB-Power
LED1
1
Device_Pwr
LED2
1
1N5819
D1
2
1u
C1, C2
2
2k
R1, R2
2
5k1
R3, R4

UP1-Progger design files

The KiCad project lives in the OpenKNX/OpenKNX-UP1 repository on GitHub; these links point at the commit this page was built from.

UP1-Progger: common questions

How big is the UP1-Progger PCB?

The UP1-Progger measures 30 × 30 mm, has 2 copper layers and is 1 mm thick.

How many components are on the UP1-Progger?

17 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the UP1-Progger design files?

From the OpenKNX/OpenKNX-UP1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UP1-Progger design in my own project?

The repository has no license, so all rights stay with OpenKNX. Use it as a reference, and ask the author before reusing the design.

More boards in OpenKNX-UP1