HardLabs

ICM

OpenLogicEFI·Hardware·Modules/Ignition Control Module/ICM2/RevB/ICM.kicad_pcb

ICM PCB layout, top view — open source board by OpenLogicEFI

About the ICM PCB

ICM is an open source PCB design by OpenLogicEFI, published on GitHub. It is a 2-layer board measuring 54.1 × 27.4 mm, with 5 components from 3 distinct parts.

By type, the board carries 2 transistors, 2 resistors and 1 connector.

From the project

Hardware is based off an open source project called Speeduino by Josh Stewart.

OpenLogicEFI ECU's are based off an open source project called Speeduino by Josh Stewart. Currently all released boards use official Speeduino firmware. In TunerStudio set to "Board Layout" to "Speeduino 0.4"

- The Official Speeduino Manual, documents and discord are the best places to start.

ICM bill of materials (BOM)

5 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
ISL9V3040P3
Q1, Q2
1
Conn_01x06
J1
2
R
R1, R2

ICM design files

The KiCad project lives in the OpenLogicEFI/Hardware repository on GitHub; these links point at the commit this page was built from.

ICM: common questions

How big is the ICM PCB?

The ICM measures 54.1 × 27.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ICM?

5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ICM design files?

From the OpenLogicEFI/Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ICM design in my own project?

The repository has no license, so all rights stay with OpenLogicEFI. Use it as a reference, and ask the author before reusing the design.

More boards in Hardware