Relay board
OpenMagnetics·Lab·hardware/relay-board-revB/relay_board.kicad_pcb
About the Relay board
Relay board is an open source STM32 PCB design by OpenMagnetics, published on GitHub. It is a 4-layer board measuring 150 × 91.4 mm, with 60 components from 21 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the SOIC-16_3.9x9.9mm_P1.27mm and AP2112K-3.3TRG1. By type, the board carries 18 relays, 13 capacitors, 13 resistors, 9 connectors, 5 ICs and 2 diodes.
Main components on the Relay board
Relay board bill of materials (BOM)
60 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBT6 LQFP-48_7x7mm_P0.5mm | LQFP-48_7x7mm_P0.5mm | U1 |
| 3 | SOIC-16_3.9x9.9mm_P1.27mm | SOIC-16_3.9x9.9mm_P1.27mm | U2, U3, U4 |
| 1 | AP2112K-3.3TRG1 SOT-23-5 | SOT-23-5 | U5 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 4 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2, J3, J4, J5 |
| 3 | BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J6, J7, J9 |
| 1 | PinHeader_1x05_P1.27mm_Vertical | PinHeader_1x05_P1.27mm_Vertical | J8 |
| 18 | G6K-2F-RF-S | Relay_Omron_G6K-2F-RF-S | K1, K2, K3, K4, K5, K6, K7, K8 +10 |
| 1 | KT-0603R LED_0603_1608Metric | LED_0603_1608Metric | D1 |
| 1 | USBLC6-2SC6 SOT-23-6 | SOT-23-6 | D2 |
| 2 | CL21A226MAQNNNE C_0805_2012Metric | C_0805_2012Metric | C1, C2 |
| 2 | CL10A105KB8NNNC C_0603_1608Metric | C_0603_1608Metric | C3, C4 |
| 9 | CL05B104KO5NNNC C_0402_1005Metric | C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C11, C12 +1 |
| 2 | 0402WGF5101TCE R_0402_1005Metric | R_0402_1005Metric | R1, R2 |
| 2 | 0402WGF1002TCE R_0402_1005Metric | R_0402_1005Metric | R3, R4 |
| 1 | TNPW0805100RBEEA R_0805_2012Metric | R_0805_2012Metric | R5 |
| 2 | 0805W8F0000T5E R_0805_2012Metric | R_0805_2012Metric | R9, R11 |
| 1 | 0402WGF1001TCE R_0402_1005Metric | R_0402_1005Metric | R10 |
| 1 | TNPW08051K00BEEA R_0805_2012Metric | R_0805_2012Metric | R12 |
| 2 | 0805W8F470JT5E R_0805_2012Metric | R_0805_2012Metric | R13, R16 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0805W8F470KT5E R_0805_2012Metric | R_0805_2012Metric | R14, R15 |
Relay board design files
The KiCad project lives in the OpenMagnetics/Lab repository on GitHub; these links point at the commit this page was built from.
Relay board: common questions
What microcontroller does the Relay board use?
The Relay board is built around the STM32F072CBT6, from the STM32 family.
How big is the Relay board?
The Relay board measures 150 × 91.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Relay board?
60 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Relay board design files?
From the OpenMagnetics/Lab repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Relay board design in my own project?
The repository has no license, so all rights stay with OpenMagnetics. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Relay board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Lab
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k