65 open source boards using the STM32F072CBT6

Real designs built with the STM32F072CBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

65 boardsClear filters|Most starred

How designs wire the STM32F072CBT6

Read from the KiCad layouts of 49 open source designs, one per repository: what each pin of the STM32F072CBT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 48 of 49 designs, most often 100 nF (then 4.7 µF).
  • The NRST pin has a capacitor to GND on 47 of 49 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 46 of 49 designs, most often 100 nF (then 1 µF).
  • The VDDIO2 pin has a decoupling capacitor on 45 of 49 designs, most often 100 nF (then 4.7 µF).
VBATpin 1Connected to: 3.3V 82%
  • Decoupling capacitor on 78% · 100 nF (91), 1 µF (13), 10 nF (12)
PC13pin 2Connected to: Not connected 71% · a signal 29%
PC14pin 3Connected to: Not connected 65% · a signal 35%
PC15pin 4Connected to: Not connected 76% · a signal 24%
PF0pin 5Connected to: Not connected 78% · a signal 22%
PF1pin 6Connected to: Not connected 80% · a signal 20%
NRSTpin 7Connected to: A connector 45%
  • Capacitor to GND on 96% · 100 nF (38), 1 µF (6), 4.7 nF (2)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 98%
  • Decoupling capacitor on 94% · 100 nF (61), 1 µF (22), 10 nF (19)
VSSpin 23, 35, 47Connected to: GND 100%
VDDpin 24, 48Connected to: 3.3V 100%
  • Decoupling capacitor on 98% · 100 nF (126), 4.7 µF (22), 10 µF (10)
VDDIO2pin 36Connected to: 3.3V 100%
  • Decoupling capacitor on 92% · 100 nF (50), 4.7 µF (18), 10 µF (4)
BOOT0pin 44Connected to: Signal 98%
  • Resistor to GND on 73% · 10 kΩ (28), 100 kΩ (3), 5.1 kΩ (2)

32 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Le capybara by sporkus, Stm32 chiffre 36keys by sporkus, Heimdall by modern-hobbyist and Anticheww by AcheronProject.

The STM32F072CBT6 in open source designs

The gallery holds 65 open source boards using the STM32F072CBT6 from 50 GitHub repositories; a typical one measures about 209.7 × 84.5 mm and carries around 105 components.

80% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.

The most starred is Le capybara by sporkus.

Microcontrollers on boards using the STM32F072CBT6

STM32F072CBT6: common questions

Where can I find a STM32F072CBT6 reference design?

Each of the 65 boards on this page is a real design using the STM32F072CBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F072CBT6 VDD pin?

The VDD pins have a decoupling capacitor on 48 of 49 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 49 open source designs using the STM32F072CBT6.

How is the STM32F072CBT6 NRST pin connected?

The NRST pin has a capacitor to GND on 47 of 49 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 49 open source designs using the STM32F072CBT6.

What decoupling capacitors do designs use on the STM32F072CBT6 VDDA pin?

The VDDA pin has a decoupling capacitor on 46 of 49 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 49 open source designs using the STM32F072CBT6.

What parts are used alongside the STM32F072CBT6?

The XC6206PXXXMR-REGULATOR_LINEAR, USBLC6-2SC6, PRTR5V0U2X, XC6206P332MR-G and 74HC4051 appear in the most repositories here.

Which microcontrollers do boards using the STM32F072CBT6 use?

Most are built on STM32 (63) and ESP8266 (2).

How big is a typical board using the STM32F072CBT6?

The median is 209.7 × 84.5 mm, and 80% are two-layer designs.

What is the most popular open source board using the STM32F072CBT6?

By GitHub stars, Le capybara by sporkus, with 57 stars.

Can I simulate one of these boards using the STM32F072CBT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part