Blade12
About the Blade12 PCB
Blade12 is an open source PCB design by opulo-inc, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 187.2 × 26.6 mm, with 38 components from 5 distinct parts.
Other key parts include the DS28E07. By type, the board carries 14 connectors, 12 ICs and 12 resistors.
From the project
The LumenPnP is an open source pick and place machine.
The LumenPnP is an open source pick and place machine that reliably and accurately assembles electronic components onto circuit boards.
The LumenPnP is available for sale on the Opulo Website. Machines are being used in active production daily. If you build or buy one, please help the project by documenting bugs with a GitHub issue.
Please read the wiki here! The wiki covers information about the state of the project, contributing instructions, and frequently asked questions.
Main components on the Blade12
Blade12 bill of materials (BOM)
38 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | DS28E07 | DS28E07_MULTI | U1, U2, U3, U4, U5, U6, U7, U8 +4 |
| 12 | SPRING_PINS | AVX-915-005-541-Contact-Surface | J2, J5, J6, J7, J8, J9, J10, J11 +4 |
| 1 | IN | JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J3 |
| 1 | OUT | JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J4 |
| 12 | 1M | R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9 +4 |
Blade12 design files
The KiCad project lives in the opulo-inc/lumenpnp repository on GitHub; these links point at the commit this page was built from.
Blade12: common questions
How big is the Blade12 PCB?
The Blade12 measures 187.2 × 26.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blade12?
38 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Blade12 design files?
From the opulo-inc/lumenpnp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Blade12 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which opulo-inc chose for the repository.
More boards in lumenpnp
STM32LumenPnP Motherboard
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
Ftp
75 × 75 mm81 parts2LCC-BY-SA-4.03.7k
Blade13
203 × 26.6 mm42 parts2LCC-BY-SA-4.03.7k
Index - Ring Light
40 × 50.2 mm21 parts2LCC-BY-SA-4.03.7k
Datum
80 × 35 mm5 parts2LCC-BY-SA-4.03.7k
Z limit
19.8 × 30.3 mm3 parts2LCC-BY-SA-4.03.7k
Xy limit
98 × 27 mm3 parts2LCC-BY-SA-4.03.7k