Blade13
About the Blade13 PCB
Blade13 is an open source PCB design by opulo-inc, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 203 × 26.6 mm, with 42 components from 6 distinct parts.
Other key parts include the DS28E07. By type, the board carries 15 connectors, 14 resistors and 13 ICs.
From the project
The LumenPnP is an open source pick and place machine.
The LumenPnP is an open source pick and place machine that reliably and accurately assembles electronic components onto circuit boards.
The LumenPnP is available for sale on the Opulo Website. Machines are being used in active production daily. If you build or buy one, please help the project by documenting bugs with a GitHub issue.
Please read the wiki here! The wiki covers information about the state of the project, contributing instructions, and frequently asked questions.
Main components on the Blade13
Blade13 bill of materials (BOM)
42 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | DS28E07 | DS28E07_MULTI | U1, U2, U3, U4, U5, U6, U7, U8 +5 |
| 1 | IN | JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J1 |
| 1 | OUT | JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical | J2 |
| 13 | SPRING_PINS | AVX-915-005-541-Contact-Surface | J3, J4, J5, J6, J7, J8, J9, J10 +5 |
| 1 | 120R | R_0805_2012Metric | R1 |
| 13 | 1M | R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9 +5 |
Blade13 design files
The KiCad project lives in the opulo-inc/lumenpnp repository on GitHub; these links point at the commit this page was built from.
Blade13: common questions
How big is the Blade13 PCB?
The Blade13 measures 203 × 26.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blade13?
42 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Blade13 design files?
From the opulo-inc/lumenpnp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Blade13 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which opulo-inc chose for the repository.
More boards in lumenpnp
STM32LumenPnP Motherboard
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
Ftp
75 × 75 mm81 parts2LCC-BY-SA-4.03.7k
Blade12
187.2 × 26.6 mm38 parts2LCC-BY-SA-4.03.7k
Index - Ring Light
40 × 50.2 mm21 parts2LCC-BY-SA-4.03.7k
Datum
80 × 35 mm5 parts2LCC-BY-SA-4.03.7k
Z limit
19.8 × 30.3 mm3 parts2LCC-BY-SA-4.03.7k
Xy limit
98 × 27 mm3 parts2LCC-BY-SA-4.03.7k