Plusz end card with turnstile

oresat·oresat-end-cards·oresat0-plusz-end-card/card/plusz-end-card-with-turnstile.kicad_pcb

Plusz end card with turnstile PCB layout, top view — open source board by oresat

About the Plusz end card with turnstile PCB

Plusz end card with turnstile is an open source PCB design by oresat, published on GitHub. It is a 4-layer board measuring 99.8 × 94.6 mm, with 38 components from 12 distinct parts.

Other key parts include the QCN-19+ and FLIGHMARKERNEW. By type, the board carries 15 connectors, 6 test points, 4 ICs and 4 resistors.

From the project

Repo for the OreSat +/-Z end cards (Card #1 and #20)

OreSat cards in the top position (#1) and bottom position (#20) are special because they interface with both the solar arrays and with the end caps. They also tend to hold deployable antennas.

- 4 solar panel connectors - 3 available RF connectors - Alternative backplane connectors only (since the solar panel connectors take up the main connector spot)

Copyright Portland State Aerospace Society 2022.

Main components on the Plusz end card with turnstile

QCN-19+FLIGHMARKERNEW

Plusz end card with turnstile bill of materials (BOM)

38 components, 12 distinct parts.

Qty	Part	Footprint	Refs
3	QCN-19+	QCN-XXX+	U1, U2, U3
1	FLIGHMARKERNEW	FLIGHTMARKER_NEW_BOARDS	U$1
4	Harwin M55-7101242R	M55-7101242R	J1, J2, J3, J4
1	TFM-120-01-L-D-RA J-SAMTEC-TFM-120-X1-XXX-D-RA Samtec	J-SAMTEC-TFM-120-X1-XXX-D-RA	J6
10	R107064070_CONTACT	R107064070_CONTACT	J7, J8, J9, J10, J11, J12, J13, J14 +2
1	J-HARWIN-M55-6001242R	HARWIN-M55-60X1242R	CF1
3	J-MOLEX-SMPM-73300-003X	J-MOLEX-SMPM-073300-003X	CM1, CM2, CM3
4	MCMASTER-94100A150	MCMASTER-94100A150	HW1, HW2, HW3, HW4
1	ORESAT-CARD-V1.3-GENERIC-3RF	ORESAT-CARD-V1.3-GENERIC-3RF	PCB1
6	TEST-POINT-LARGE-SQUARE	1X01	TP1, TP2, TP3, TP4, TP5, TP6
3	50	.0603-C-NOSILK	R1, R2, R3
1	7.5 1W	PAC100-FOR-MELTWIRE	R5

Plusz end card with turnstile design files

The KiCad project lives in the oresat/oresat-end-cards repository on GitHub; these links point at the commit this page was built from.

Plusz end card with turnstile: common questions

How big is the Plusz end card with turnstile PCB?

The Plusz end card with turnstile measures 99.8 × 94.6 mm, has 4 copper layers and is 1.7702 mm thick.

How many components are on the Plusz end card with turnstile?

38 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Plusz end card with turnstile design files?

From the oresat/oresat-end-cards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Plusz end card with turnstile design in my own project?

The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.

More boards in oresat-end-cards