HardLabs

OreSat1 -Z End Card

oresat·oresat-end-cards·oresat1-minusz-end-card/oresat1-minusz-end-card.kicad_pcb

OreSat1 -Z End Card PCB layout, top view — open source board by oresat

About the OreSat1 -Z End Card PCB

OreSat1 -Z End Card is an open source PCB design by oresat, published on GitHub. It is a 4-layer board measuring 99.8 × 94.6 mm, with 70 components from 28 distinct parts.

Other key parts include the MAX7310ATE+, MIC842LYC5-TR and TS5A21366DCUR. By type, the board carries 34 resistors, 8 capacitors, 7 transistors, 5 ICs, 4 connectors and 2 diodes.

It belongs with the rf & radio designs in this gallery.

From the project

Repo for the OreSat +/-Z end cards (Card #1 and #20)

The OreSat1 -Z End Card fits in the very "bottom" slot (Slot #20?) in the OreSat1 2U backplane. It's special because it hosts whatever antenna is on the -Z face of the satellite, which in this case is an L band monopole, a UHF band monopole, and an L1 band GPS patch antenna. The -Z End Card:

- Connects to the backplane with a main connector and three RF SMPM connectors - Connects two -Z solar modules to the backplane (two of the solar module spots are taken up by the copper radiator panels for the CFC assembly) - Routes an SMPM connector to a U.FL connector to jump up to the -Z End Cap's L1…

Main components on the OreSat1 -Z End Card

MAX7310ATE+MIC842LYC5-TRTS5A21366DCUR

OreSat1 -Z End Card bill of materials (BOM)

70 components, 28 distinct parts.

QtyPartRefs
1
MAX7310ATE+
MAX7310
Analog Devices
U2
2
MIC842LYC5-TR
MIC842LYC5
Microchip
U11, U12
2
TS5A21366DCUR
TS5A21366
Texas Instruments
U201, U203
1
DMP2240UDM
Diodes Inc
Q1
4
PMV45EN2R
PMV45EN
Nexperia
Q2, Q3, Q4, Q6
2
DMP2240UDM
DMP2240UDM-7
Diodes Inc
Q5, Q7
1
TFM-120-01-L-D-RA
J-SAMTEC-TFM-120-01-L-D-RA
Samtec
J1
1
U.FL-R-SMT-1(10)
U.FL-R-SMT-1
Hirose
J2
2
M55-7101242R
Harwin
J3, J5
1
M55-6001242R
Harwin
CF1
3
2477330-1
733000020
TE Connectivity Linx
CM1, CM2, CM3
6
N/A
M2-Press-Fit-Nut
N/A
HW1, HW2, HW3, HW4, HW5, HW6
1
150060RS75000
RED
Wurth
D1
1
1N4151WS-E3-08
1N4151WS
Vishay
D2
4
C0603C104K5RACAUTO
100n
KEMET
C3, C10, C201, C203
3
GRT188R71E105KE13D
1u
Murata Electronics
C5, C22, C23
1
C0603C474K3RACAUTO
470n
KEMET
C205
1
PAC100007508FA1000
7.5 1W
Vishay
R1
1
RMCF0603FT10R0
10
Stackpole Electronics
R24
8
RMCF0603FT10K0
10k
Stackpole Electronics
R30, R61, R91, R92, R93, R95, R97, R117
Show 8 more
QtyPartRefs
13
RMCF0603FT1K00
1k
Stackpole Electronics
R39, R40, R45, R46, R52, R53, R54, R55 +5
2
RMCF0603FT100R
100
Stackpole Electronics
R60, R80
2
RMCF0603FT665K
665k
Stackpole Electronics
R77, R81
2
RMCF0603FT330K
330k
Stackpole Electronics
R78, R82
2
RMCF0603FT1M00
1M
Stackpole Electronics
R79, R83
1
RMCF0603FT47K0
47k
Stackpole Electronics
R94
1
RMCF1206ZG0R00
0
Stackpole Electronics
R98
1
RMCF0603FT4K70
4.7k
Stackpole Electronics
R99

OreSat1 -Z End Card design files

The KiCad project lives in the oresat/oresat-end-cards repository on GitHub; these links point at the commit this page was built from.

OreSat1 -Z End Card: common questions

How big is the OreSat1 -Z End Card PCB?

The OreSat1 -Z End Card measures 99.8 × 94.6 mm, has 4 copper layers and is 1.7702 mm thick.

How many components are on the OreSat1 -Z End Card?

70 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the OreSat1 -Z End Card design files?

From the oresat/oresat-end-cards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OreSat1 -Z End Card design in my own project?

The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.

More boards in oresat-end-cards

Similar boards