Tube screamer
ostojaatanasijevic·tube_screamer·tube_screamer/tube_screamer.kicad_pcb
About the Tube screamer PCB
Tube screamer is an open source PCB design by ostojaatanasijevic, published on GitHub. It is a 2-layer board measuring 80 × 100 mm, with 67 components from 31 distinct parts.
Other key parts include the NE5532. By type, the board carries 23 resistors, 17 capacitors, 9 transistors, 8 connectors, 2 diodes and 1 IC.

Main components on the Tube screamer
Tube screamer bill of materials (BOM)
67 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE5532 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 3 | MMBT5551 | SOT-23 | Q1, Q2, Q3 |
| 3 | AO3401A | SOT-23 | Q6, Q8, Q10 |
| 3 | AO3400A | SOT-23 | Q12, Q13, Q14 |
| 2 | Jack_6.35 | Jack_6.35mm | J1, J2 |
| 1 | Barrel_Jack_Switch | BarrelJack | J6 |
| 2 | Conn_01x01_Socket | TestPoint_THTPad_D2.5mm_Drill1.2mm | J7, J8 |
| 1 | top_panel_connector | IDC-Header_2x08_P2.54mm_Vertical | J9 |
| 1 | front_plate | front_plate | P1 |
| 1 | bottom_plate | bottom_plate | P2 |
| 1 | Battery_Cell | BatteryHolder_Eagle_12BH611-GR | BT1 |
| 5 | MountingHole | M3_hole_with_spacer | H1, H2, H3, H4, H5 |
| 1 | pedala_switch | foot_switch_tht_no_pad | SW1 |
| 2 | 1N4148WS | D_SOD-323 | D1, D2 |
| 1 | 47N 47n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 470u | CP_Radial_D8.0mm_P3.50mm | C2, C8 |
| 1 | 47P 47p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 220N 220n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C10 |
| 1 | 22N 22n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10U 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C13, C14, C15, C16 |
| 3 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C17, C18 |
| 1 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 7 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R17, R20, R21, R22, R23, R25 |
| 5 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6, R13, R14, R16 |
| 1 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 2 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R48 |
| 2 | 510K 510k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R19 |
| 2 | 100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R27 |
| 2 | 2.2K 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26, R28 |
| 1 | 47K 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47 |
Tube screamer design files
The KiCad project lives in the ostojaatanasijevic/tube_screamer repository on GitHub; these links point at the commit this page was built from.
Tube screamer: common questions
How big is the Tube screamer PCB?
The Tube screamer measures 80 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tube screamer?
67 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tube screamer design files?
From the ostojaatanasijevic/tube_screamer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tube screamer design in my own project?
The repository has no license, so all rights stay with ostojaatanasijevic. Use it as a reference, and ask the author before reusing the design.