LisaSD
About the LisaSD PCB
LisaSD is an open source PCB design by paparazzi, published on GitHub. It is a 2-layer board measuring 15 × 14 mm, with 6 components from 6 distinct parts.
By type, the board carries 4 connectors, 1 diode and 1 resistor.
From the project
Paparazzi UAV hardware
http://wiki.paparazziuav.org/wiki/SDLoggerSPIDirect
LisaSD bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X09 | lisa_spi_footprint | P1 |
| 1 | CONN_01X08 | microSD | P2 |
| 1 | CONN_01X02 | Connector_Molex_PicoBlade_53261-0271 | P3 |
| 1 | CONN_01X03 | deltang | P4 |
| 1 | 1PS79SB10 LED NXP | LED-0603 | D1 |
| 1 | 10K 330 Multicomp
Panasonic - ECG
Xicon | R_0603 | R1 |
LisaSD design files
The KiCad project lives in the paparazzi/paparazzi-hardware repository on GitHub; these links point at the commit this page was built from.
LisaSD: common questions
How big is the LisaSD PCB?
The LisaSD measures 15 × 14 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the LisaSD?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LisaSD design files?
From the paparazzi/paparazzi-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LisaSD design in my own project?
The repository has no license, so all rights stay with paparazzi. Use it as a reference, and ask the author before reusing the design.
