HardLabs

G6

parsa-novin·UGA-IREC·KiCad/G6/G6.kicad_pcb

G6 PCB layout, top view — open source STM32 board by parsa-novin
Simulate this board

About the G6 PCB

G6 is an open source STM32 PCB design by parsa-novin, published on GitHub. It is a 4-layer board measuring 127 × 127 mm, with 45 components from 32 distinct parts.

Its main chip is the STM32C051K8T6, from the STM32 family. Other key parts include the BGU7004,115, ISL83488IBZ, SN74HC74DRG4 (SOIC14), BMI270 - Secondary Accelerometer and NEO-M9N-00B. By type, the board carries 17 capacitors, 13 ICs, 8 resistors, 3 connectors, 1 transistor and 1 crystal.

Main components on the G6

BGU7004,115ISL83488IBZSN74HC74DRG4 (SOIC14)BMI270 - Secondary AccelerometerNEO-M9N-00BMMC5983MA-MagnetomerMS560702BA03-50 - BarometerTMP127EDBVRQ1IIM-42653STM32C051K8T6REG1117A-1.8

G6 bill of materials (BOM)

45 components, 32 distinct parts.

QtyPartRefs
1
BGU7004,115
IC1
1
ISL83488IBZ
U1
1
SN74HC74DRG4 (SOIC14)
U2
1
BMI270 - Secondary Accelerometer
U3
1
~
U4
1
NEO-M9N-00B
U5
1
MMC5983MA-Magnetomer
U6
1
MS560702BA03-50 - Barometer
U7
1
TMP127EDBVRQ1
U8
2
IIM-42653
U10, U11
1
STM32C051K8T6
U12
1
REG1117A-1.8
U13
1
2N3904
Q1
1
ABS07-32.768KHZ-1-T
Y1
1
Conn_02x10_Odd_Even
J1
1
CONMHF1-SMD-T
J2
1
FTSH-107-01-L-DV-K-A
J3
1
IR26-21C_L110_TR8
D1
1
5.6nH
L1
7
.1uf
C1, C2, C7, C9, C12, C14, C15
Show 12 more
QtyPartRefs
1
0.1
C3
1
10uF
C4
1
1uF
C5
3
.01uF
C6, C8, C11
2
2.2uf
C10, C13
2
22pf
C16, C17
2
1k
R1, R2
1
10k
R3
1
100
R4
1
1k
R5
2
RC1206FR-0724RL
R8, R9
1
10k
R10

G6 design files

The KiCad project lives in the parsa-novin/UGA-IREC repository on GitHub; these links point at the commit this page was built from.

G6: common questions

What microcontroller does the G6 use?

The G6 is built around the STM32C051K8T6, from the STM32 family.

How big is the G6 PCB?

The G6 measures 127 × 127 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the G6?

45 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the G6 design files?

From the parsa-novin/UGA-IREC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the G6 design in my own project?

The repository has no license, so all rights stay with parsa-novin. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the G6 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in UGA-IREC

Similar boards