25 open source boards using the NEO-M9N-00B

Real designs built with the NEO-M9N-00B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the NEO-M9N-00B

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the NEO-M9N-00B connects to, and the resistors, capacitors and other passives placed on it.

  • The USB_DM pin is left unconnected on 8 of 8 designs.
  • The USB_DP pin is left unconnected on 8 of 8 designs.
  • The LNA_EN pin is left unconnected on 8 of 8 designs.
  • The RESERVED pins is left unconnected on 100% of them.
D_SELpin 2Connected to: Not connected 63% · 3.3V 25%
EXTINTpin 4Connected to: Not connected 88%
USB_DMpin 5Connected to: Not connected 100%
USB_DPpin 6Connected to: Not connected 100%
VCC_RFpin 9Connected to: Not connected 75%
GNDpin 10, 12, 13, 24Connected to: GND 100%
LNA_ENpin 14Connected to: Not connected 100%
RESERVEDpin 15, 16, 17Connected to: Not connected 100%
SDA_/_SPI_CS_Npin 18Connected to: Not connected 88%
SCL_/_SPI_SLKpin 19Connected to: Not connected 88%
V_BCKPpin 22Connected to: 3.3V 63% · not connected 25%
  • Decoupling capacitor on 63% · 10 µF (4), 100 nF (4), 1 µF (1)
VCCpin 23Connected to: 3.3V 88%
  • Decoupling capacitor on 63% · 100 nF (5), 10 µF (5), 1 µF (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commodore 7 by parsa-novin, Avionics final 260706 by TUSI-KHU, GS by wasa-rockoon and Titan R3 by 1337bowen.

The NEO-M9N-00B in open source designs

The gallery holds 25 open source boards using the NEO-M9N-00B from 9 GitHub repositories; a typical one measures about 127.5 × 108.3 mm and carries around 122 components.

76% use four copper layers or more, and 72% carry an open source license.

The most starred is Quantum control by embeddedos-org.

Microcontrollers on boards using the NEO-M9N-00B

NEO-M9N-00B: common questions

Where can I find a NEO-M9N-00B reference design?

Each of the 25 boards on this page is a real design using the NEO-M9N-00B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NEO-M9N-00B USB_DM pin connected?

The USB_DM pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the NEO-M9N-00B.

How is the NEO-M9N-00B USB_DP pin connected?

The USB_DP pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the NEO-M9N-00B.

How is the NEO-M9N-00B LNA_EN pin connected?

The LNA_EN pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the NEO-M9N-00B.

Which microcontrollers do boards using the NEO-M9N-00B use?

Most are built on STM32 (14), ESP32 (3), PIC (2) and NXP (2).

How big is a typical board using the NEO-M9N-00B?

The median is 127.5 × 108.3 mm, and 24% are two-layer designs.

What is the most popular open source board using the NEO-M9N-00B?

By GitHub stars, Quantum control by embeddedos-org, with 8 stars.

Can I simulate one of these boards using the NEO-M9N-00B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part