Led power board
About the Led power board
Led power board is an open source PCB design by partlyhuman, published on GitHub under the MIT license. It is a 2-layer board measuring 27.2 × 21 mm, with 3 components from 3 distinct parts.
By type, the board carries 1 connector, 1 diode and 1 resistor.
From the project
The Floopy Drive, an open-source flashcart for Casio Loopy
flash-32mbit — the Floopy Drive, with 32Mbit tri-voltage flash, and 256kbit SRAM cart-connector — cart connector, footprint and symbol, for use in dumpers etc. reverse-singlerom — this is the AN1M cart design that we first reverse engineered reverse-wanwan — expanding upon that to try to document wanwan, schematic only so far
Some earlier revisions and experiments are in git history.
Led power board bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Led power board design files
The KiCad project lives in the partlyhuman/floopydrive repository on GitHub; these links point at the commit this page was built from.
Led power board: common questions
How big is the Led power board?
The Led power board measures 27.2 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Led power board?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Led power board design files?
From the partlyhuman/floopydrive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Led power board design in my own project?
Yes, under the terms of its MIT license, which partlyhuman chose for the repository.
