Reverse Engineered XK-403
About the Reverse Engineered XK-403 PCB
Reverse Engineered XK-403 is an open source PCB design by partlyhuman, published on GitHub under the MIT license. It is a 2-layer board measuring 96.3 × 69.5 mm, with 14 components from 10 distinct parts.
By type, the board carries 6 resistors, 3 capacitors, 2 ICs, 1 connector, 1 battery holder and 1 diode.
From the project
The Floopy Drive, an open-source flashcart for Casio Loopy
flash-32mbit — the Floopy Drive, with 32Mbit tri-voltage flash, and 256kbit SRAM cart-connector — cart connector, footprint and symbol, for use in dumpers etc. reverse-singlerom — this is the AN1M cart design that we first reverse engineered reverse-wanwan — expanding upon that to try to document wanwan, schematic only so far
Some earlier revisions and experiments are in git history.
Reverse Engineered XK-403 bill of materials (BOM)
14 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | LOOPY-SOIC-44 | IC1 |
| 1 | ~ | LOOPY-SOIC-28 | IC2 |
| 1 | ~ | LOOPY-Edge-Connector | J1 |
| 1 | CR-2032_HF1N | BAT_CR-2032_HF1N | BT1 |
| 1 | MMBZxx | SOT-23 | D1 |
| 2 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 1 | 120nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1.2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 4 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
Reverse Engineered XK-403 design files
The KiCad project lives in the partlyhuman/floopydrive repository on GitHub; these links point at the commit this page was built from.
Reverse Engineered XK-403: common questions
How big is the Reverse Engineered XK-403 PCB?
The Reverse Engineered XK-403 measures 96.3 × 69.5 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Reverse Engineered XK-403?
14 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Reverse Engineered XK-403 design files?
From the partlyhuman/floopydrive repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Reverse Engineered XK-403 design in my own project?
Yes, under the terms of its MIT license, which partlyhuman chose for the repository.
