Nonsense

pasihe·nonsense·hardware/stm32-field-node.kicad_pcb

Nonsense PCB layout, top view — open source STM32 board by pasihe

About the Nonsense PCB

Nonsense is an open source STM32 PCB design by pasihe, published on GitHub. It is a 2-layer board measuring 45 × 35 mm, with 12 components from 10 distinct parts.

Its main chip is the STM32G031K8Tx, from the STM32 family. Other key parts include the TLV75533PDBV. By type, the board carries 5 capacitors, 2 connectors, 2 resistors, 1 IC and 1 diode.

From the project

A compact STM32G031-based microcontroller board with USB-C power, 3.3 V regulation, SWD debugging, and a 2-layer PCB.

A compact STM32G031-based microcontroller board with USB-C power, 3.3 V regulation, SWD debugging, and a 2-layer PCB.

Hardware revision: Rev A Fabrication: Gerber and drill files generated Assembly: Not assembled Validation: Not electrically validated

KiCad ERC passes cleanly. PCB DRC has no connectivity or manufacturing-rule violations; the intentional local USB-C footprint override is excluded from the library-mismatch check.

Main components on the Nonsense

Nonsense bill of materials (BOM)

12 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TLV75533PDBV
U2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x05
J2 SWD
1
STM32G031K8Tx
STM32G0
1
PESD5V0S1UA
D2
2
100NF
100nF
C1, C3
1
4.7UF
4.7uF
C2
1
1 uF
C4
1
4.7 uF
C5
2
5.1K
5.1k
R1, R2

Nonsense design files

The KiCad project lives in the pasihe/nonsense repository on GitHub; these links point at the commit this page was built from.

Nonsense: common questions

What microcontroller does the Nonsense use?

The Nonsense is built around the STM32G031K8Tx, from the STM32 family.

How big is the Nonsense PCB?

The Nonsense measures 45 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nonsense?

12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nonsense design files?

From the pasihe/nonsense repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nonsense design in my own project?

The repository has no license, so all rights stay with pasihe. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Nonsense without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards