60 open source boards using the TLV75533PDBV

Real designs built with the TLV75533PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

60 boardsClear filters|Most starred

How designs wire the TLV75533PDBV

Read from the KiCad layouts of 39 open source designs, one per repository: what each pin of the TLV75533PDBV connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 28 of 39 designs, most often 1 µF (then 100 nF).
  • The OUT pin is tied to 3.3V on 31 of 39 designs (not connected on 3, a signal on 5).
GNDpin 2Connected to: GND 87%
ENpin 3Connected to: Signal 49% · 5V 46%
  • Capacitor to GND on 72% · 1 µF (18), 100 nF (5), 10 µF (3)
NCpin 4Connected to: Not connected 95%
OUTpin 5Connected to: 3.3V 79%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Yatchy by Szybet, Noah hardware by GonzaCerv, Xenigotchi v1.5 by FreeSK8 and VhARIO-ESPC3 by har-in-air.

The TLV75533PDBV in open source designs

The gallery holds 60 open source boards using the TLV75533PDBV from 40 GitHub repositories; a typical one measures about 50 × 42 mm and carries around 68 components.

61% use four copper layers or more, and 48% carry an open source license.

The most starred is Yatchy by Szybet.

Microcontrollers on boards using the TLV75533PDBV

TLV75533PDBV: common questions

Where can I find a TLV75533PDBV reference design?

Each of the 60 boards on this page is a real design using the TLV75533PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75533PDBV EN pin connected?

The EN pin has a capacitor to GND on 28 of 39 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 39 open source designs using the TLV75533PDBV.

How is the TLV75533PDBV OUT pin connected?

The OUT pin is tied to 3.3V on 31 of 39 designs (not connected on 3, a signal on 5). Counted from the KiCad layouts of 39 open source designs using the TLV75533PDBV.

What parts are used alongside the TLV75533PDBV?

The USBLC6-2SC6, ESP32-S3-WROOM-1, USBLC6-2P6, W25Q128JVS and BMP280 appear in the most repositories here.

Which microcontrollers do boards using the TLV75533PDBV use?

Most are built on STM32 (13), ESP32 (10), NXP (4) and RP2040/RP2350 (3).

How big is a typical board using the TLV75533PDBV?

The median is 50 × 42 mm, and 39% are two-layer designs.

What is the most popular open source board using the TLV75533PDBV?

By GitHub stars, Yatchy by Szybet, with 180 stars.

Can I simulate one of these boards using the TLV75533PDBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part