ECE Openhouse Souvenir
patthananb·ECE_Openhouse_Souvenir·hardware/ece_souvenir.kicad_pcb
About the ECE Openhouse Souvenir PCB
ECE Openhouse Souvenir is an open source PCB design by patthananb, published on GitHub. It is a 2-layer board measuring 30 × 30 mm, with 25 components from 12 distinct parts.
Other key parts include the TLC555CDR. By type, the board carries 14 diodes, 6 resistors, 3 capacitors, 1 IC and 1 transistor.
From the project
KiCad design for ECE OPEN HOUSE 2026
30 × 30 mm souvenir board. TOP: ECE KMUTNB logo silkscreen. BOTTOM: CMOS 555 astable blinking 14 orange 0402 LEDs laid out as 7-segment "ECE". KiCad 10.0.6. Sources generated by scripts in tools/.
555 astable (TLC555, CMOS). Q1 (MMBT3906 PNP) is a high-side switch fed from 555 OUT through R6 = 4.7 kΩ: it conducts while OUT is LOW (discharge phase), so the LEDs flash briefly. Each digit has one shared current-limit resistor (advisor review 2026-10-11); LED cathodes go to GND.
Main components on the ECE Openhouse Souvenir
ECE Openhouse Souvenir bill of materials (BOM)
25 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC555CDR | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MMBT3906LT1G MMBT3906 | SOT-23_Handsoldering | Q1 |
| 10 | XL-1608UOC-06 Orange | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D10, D11, D12 +2 |
| 4 | XL-1608UWC-04 White | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6, D7, D8, D9 |
| 1 | CC0603KRX7R7BB105 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | CC0603KRX7R9BB104 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 0603B103K500NT 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 0603WAF1004T5E 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 0603WAF1203T5E 120k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | 0603WAF6800T5E 680 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5 |
| 1 | 0603WAF2200T5E 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 0603WAF3301T5E 3.3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
ECE Openhouse Souvenir design files
The KiCad project lives in the patthananb/ECE_Openhouse_Souvenir repository on GitHub; these links point at the commit this page was built from.
ECE Openhouse Souvenir: common questions
How big is the ECE Openhouse Souvenir PCB?
The ECE Openhouse Souvenir measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE Openhouse Souvenir?
25 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the ECE Openhouse Souvenir design files?
From the patthananb/ECE_Openhouse_Souvenir repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ECE Openhouse Souvenir design in my own project?
The repository has no license, so all rights stay with patthananb. Use it as a reference, and ask the author before reusing the design.