Low pass filter board esp32-arduino
About the Low pass filter board esp32-arduino
Low pass filter board esp32-arduino is an open source PCB design by paulh002, published on GitHub. It is a 2-layer board measuring 154.2 × 151.7 mm, with 93 components from 17 distinct parts.
Other key parts include the ULN2803A and 74HC595. By type, the board carries 54 capacitors, 18 inductors, 13 relays, 5 connectors, 2 ICs and 1 resistor.
From the project
Lowpass filter board managed by ESP32
Main components on the Low pass filter board esp32-arduino
Low pass filter board esp32-arduino bill of materials (BOM)
93 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ULN2803A | DIP-18_W7.62mm | U1 |
| 1 | 74HC595 | DIP-16_W7.62mm_LongPads | U2 |
| 1 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J1 |
| 1 | 12V Switched | TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J2 |
| 1 | Antenne | SMA_Amphenol_132134_Vertical | J3 |
| 1 | RF in | SMA_Amphenol_132134_Vertical | J4 |
| 1 | 12V | TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J5 |
| 13 | G5V-2 | Relay_DPDT_Omron_G5V-2 | K1, K2, K3, K4, K5, K6, K7, K8 +5 |
| 18 | 8uH 40T T50-2 | Transformer_Toroid_Horizontal_D14.0mm_Amidon-T50 | L1, L2, L3, L4, L5, L6, L7, L8 +10 |
| 24 | 750p | C_Disc_D9.0mm_W5.0mm_P5.00mm | C1, C4, C5, C8, C9, C12, C13, C16 +16 |
| 12 | 30p Trim | C_Disc_D9.0mm_W5.0mm_P5.00mm | C2, C7, C10, C15, C22, C27, C30, C35 +4 |
| 6 | 680 | C_Disc_D9.0mm_W5.0mm_P5.00mm | C3, C11, C23, C31, C39, C47 |
| 6 | 680p | C_Disc_D9.0mm_W5.0mm_P5.00mm | C6, C14, C26, C34, C42, C50 |
| 2 | 100 | CP_Radial_D8.0mm_P5.00mm | C17, C19 |
| 2 | 100n | C_Disc_D9.0mm_W5.0mm_P5.00mm | C18, C20 |
| 2 | 10n | C_Disc_D9.0mm_W5.0mm_P5.00mm | C53, C54 |
| 1 | 0 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
Low pass filter board esp32-arduino design files
The KiCad project lives in the paulh002/low-pass-filter-board-esp32-arduino repository on GitHub; these links point at the commit this page was built from.
Low pass filter board esp32-arduino: common questions
How big is the Low pass filter board esp32-arduino?
The Low pass filter board esp32-arduino measures 154.2 × 151.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Low pass filter board esp32-arduino?
93 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Low pass filter board esp32-arduino design files?
From the paulh002/low-pass-filter-board-esp32-arduino repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Low pass filter board esp32-arduino design in my own project?
The repository has no license, so all rights stay with paulh002. Use it as a reference, and ask the author before reusing the design.