Atari-A8-Cartridge
pdaehne·Atari-A8-Cartridge
About the Atari-A8-Cartridge PCB
Atari-A8-Cartridge is an open source PCB design by pdaehne, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 53.8 × 70 mm, with 12 components from 8 distinct parts.
Other key parts include the 27C512. By type, the board carries 4 resistors, 3 connectors, 2 diodes, 1 IC, 1 switch and 1 capacitor.
From the project
KiCad project and Gerber files for a simple Atari A8 Cartridge up to 16 KiB without any Mapper.
This repository contains the KiCad project and Gerber files for a simple cartridge for the Atari 8-Bit Computers (Atari 400/800/XL/XE/XEGS). It supports 8 KiB and 16 KiB cartridge images that do not need memory mappers. You may put multiple cartridge images on one cartridge, and select which one of the images to start by using DIP switches, pin headers and jumpers.

Main components on the Atari-A8-Cartridge
Atari-A8-Cartridge bill of materials (BOM)
12 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 27C512 | DIP-28_W15.24mm_Socket_LongPads | U1 |
| 1 | Atari A8 Cartridge Connector | Cartridge | J1 |
| 1 | Chip Select | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SW_DIP_x05 | SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 4 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
Atari-A8-Cartridge design files
The KiCad project lives in the pdaehne/Atari-A8-Cartridge repository on GitHub; these links point at the commit this page was built from.
- LayoutAtari-A8-Cartridge.kicad_pcb
- SchematicAtari-A8-Cartridge.kicad_sch
Atari-A8-Cartridge: common questions
How big is the Atari-A8-Cartridge PCB?
The Atari-A8-Cartridge measures 53.8 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Atari-A8-Cartridge?
12 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Atari-A8-Cartridge design files?
From the pdaehne/Atari-A8-Cartridge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Atari-A8-Cartridge design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.