50 open source boards using the 27C512
Real designs built with the 27C512, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Z80-cmos nmos tester
djtersteegc
81.3 × 86.4 mm38 parts2LMIT61Zx multisound
UzixLS
170 × 64 mm173 parts2LMIT37We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32Zx sizif-128
UzixLS
140 × 85 mm107 parts2LMIT32Zx sizif-512-ext
UzixLS
213 × 64 mm145 parts2LMIT19Tlcs90-rom reader
sergiopolog
111.8 × 121.9 mm54 parts2LGPL-3.015C64ExpansionBreakout
hackup
99.1 × 82.4 mm10 parts2LNo license14Kakave
ZPilot
80 × 96.2 mm20 parts2LGPL-3.012SodaIDE v2 konami case
Danjovic
100 × 65.5 mm30 parts2LCC0-1.011Oric
Board-Folk
206.2 × 138.1 mm127 parts2LNo license4Daewoo Backslot FMPAC
RBSC
85.4 × 64 mm47 parts2LNo license4No mcu distance meter
AlexIII
99.6 × 42.7 mm33 parts2LNo license4Burstcart via
ytmytm
56 × 91 mm23 parts2LNo license42332-2364-EPROM-Adapter
pdaehne
23.2 × 36 mm11 parts2LCC-BY-NC-4.031551-RAMBOard
ytmytm
58.7 × 40.6 mm9 parts2LNo license3Z80-cmos nmos tester
Vakon84
81.3 × 86.4 mm38 parts2LMIT2AVR/Arduino
Sbc6502a1
tkhshmsy
95 × 100 mm36 parts2LMIT26809 Plus EPROM Version
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1Cpu board 03
sim82
99.1 × 94.2 mm63 parts2LMIT1Bc80
isolenta
149.9 × 111.8 mm62 parts2LNo license1MSX-Cartridge
pdaehne
65.4 × 65.2 mm6 parts2LCC-BY-NC-4.01AVR/Arduino
8bit
Haxintosh
214.7 × 238.3 mm468 parts2LCERN-OHL-P-2.00Dtk-386-replica
youxiaojie
175 × 220.4 mm173 parts4LGPL-3.00AVR/Arduino
Control board
edatki
124 × 113 mm95 parts2LNo license0Rc rom
PickledDog
99.1 × 49.9 mm22 parts2LApache-2.00Atari-A8-Cartridge
pdaehne
53.8 × 70 mm12 parts2LCC-BY-NC-4.00AVR/Arduino
C16-multirom
ytmytm
55.9 × 42 mm11 parts2LNo license0AVR/Arduino
1541-II-low profile rom switcher
jwestfall69
18.4 × 41.5 mm5 parts2LUnlicense0ZX Diagnostic 2021
tebl
57.9 × 61.6 mm29 parts2LCERN-OHL-1.232SodaIDE v2 patola case
Danjovic
100 × 64.7 mm30 parts2LCC0-1.011AVR/Arduino
Burstcart
ytmytm
56 × 91 mm21 parts2LNo license4Cpu board 03 4l
sim82
99.1 × 94.2 mm62 parts4LMIT168k8-boad
Lintaroh
165 × 135 mm77 parts2LMIT0Gb cartridge rom ram batt tht
roybaer
50 × 61 mm9 parts2LNo license16Soda IDE
Danjovic
100 × 65.5 mm29 parts2LCC0-1.011
How designs wire the 27C512
Read from the KiCad layouts of 40 open source designs, one per repository: what each pin of the 27C512 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 97% | — |
| VCCpin 28 | Connected to: 5V 93% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ROM Emulator by MicroCoreLabs, EProg by KALTCHUK, Z80-cmos nmos tester by djtersteegc and Zx multisound by UzixLS.
The 27C512 in open source designs
The gallery holds 50 open source boards using the 27C512 from 40 GitHub repositories; a typical one measures about 99.1 × 85.7 mm and carries around 32 components.
90% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is ROM Emulator by MicroCoreLabs.
Parts used alongside the 27C512
Microcontrollers on boards using the 27C512
What boards using the 27C512 are built for
27C512: common questions
Where can I find a 27C512 reference design?
Each of the 50 boards on this page is a real design using the 27C512. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 27C512?
The 74LS00, 74LS245, 74LS04, 74LS02 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 27C512 use?
Most are built on AVR/Arduino (8), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the 27C512?
The median is 99.1 × 85.7 mm, and 90% are two-layer designs.
What is the most popular open source board using the 27C512?
By GitHub stars, ROM Emulator by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the 27C512 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.