LADCP interface box
pedrolpena·ladcp_interface·ladcp_interface_box/ladcp_interface_box/ladcp_interface_box.kicad_pcb
About the LADCP interface box PCB
LADCP interface box is an open source PCB design by pedrolpena, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 92 × 41 mm, with 38 components from 20 distinct parts.
Other key parts include the FT4232H, 3.3V regulator, MAX3232 and 12V LDO. By type, the board carries 22 capacitors, 7 connectors, 4 ICs, 2 inductors, 2 resistors and 1 crystal.
From the project
Break out boards to make charging and configuring LADCP's cleaner and easier.
Main components on the LADCP interface box
LADCP interface box bill of materials (BOM)
38 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT4232H | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | 3.3V regulator | TO-252-3_TabPin2 | U2 |
| 1 | MAX3232 | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | 12V LDO | SOT-23 | U5 |
| 1 | CRYSTAL | Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | TERM BLK 8POS SIDE ENTRY 5MM PCB | TerminalBlock_Phoenix_PT-1,5-8-5.0-H_1x08_P5.00mm_Horizontal | J1 |
| 1 | USB_B_Mini | USB_Mini-B_Wuerth_65100516121_Horizontal | J2 |
| 1 | CHARGER | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | SWITCH | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J4 |
| 1 | AMMETER | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J5 |
| 1 | VOLT METER | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J6 |
| 1 | +12V | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J7 |
| 2 | FerriteBead_Small | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2 |
| 16 | .1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C5, C6, C7, C8, C9 +8 |
| 1 | 3.3uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 3 | 4.7uF | CP_EIA-2012-12_Kemet-R_Pad1.30x1.05mm_HandSolder | C13, C14, C20 |
| 1 | 50V 1uF | CP_Radial_D4.0mm_P1.50mm | C21 |
| 1 | 50V 10uF | CP_Radial_D6.3mm_P2.50mm | C22 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 12K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
LADCP interface box design files
The KiCad project lives in the pedrolpena/ladcp_interface repository on GitHub; these links point at the commit this page was built from.
LADCP interface box: common questions
How big is the LADCP interface box PCB?
The LADCP interface box measures 92 × 41 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LADCP interface box?
38 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the LADCP interface box design files?
From the pedrolpena/ladcp_interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LADCP interface box design in my own project?
Yes, under the terms of its GPL-3.0 license, which pedrolpena chose for the repository.