78 open source boards using the MAX3232
Real designs built with the MAX3232, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LGPL-2.0291STM32
Socket
eddyem
87 × 71 mm84 parts2LNo license80RP2040/RP2350
ThrottleBlaster
scrapcomputing
33.1 × 43.8 mm34 parts2LGPL-2.052ESP32
Dual button doorbell
espena
68.6 × 68.6 mm79 parts4LGPL-3.026RP2040/RP2350
VersaTermMinus
jimbro1000
86.2 × 78 mm53 parts2LGPL-3.020RP2040/RP2350
RaspberryPi-Pico-Motor-Expansion-Board
eamars
91.7 × 66.8 mm63 parts4LGPL-3.018DonutDongle
svirant
42.2 × 68.1 mm40 parts2LGPL-3.016Bexkat1
mattstock
91.4 × 73.7 mm64 partsNo license15NXP
TeensyBoardZ80
mecparts
115 × 57.2 mm38 parts2LMIT13MounT K85 Feather
bkw777
50.8 × 22.9 mm10 parts2LGPL-3.012STM32
OpenWave
wattnotions
40 × 40 mm51 parts2LNo license8Uccm connector
thinkfat
100 × 133.5 mm36 parts2LNo license7Scorzonera
miek
70.7 × 53.3 mm32 parts2LNo license7ESP32-Sentinel-Kinetic-Wireless-Dongle
alextrical
50 × 50 mm70 parts4LCERN-OHL-S-2.06RP2040/RP2350
Pico w dual serial
n1kdo
86.4 × 76.2 mm59 parts2LCC-BY-SA-4.05ESP32
UPSMonitorStandalone rev01
enriquewph
100 × 70 mm103 parts2LMIT4ESP8266
CT800
d3rvita
204.5 × 121.9 mm79 parts2LMIT4STM32
Data-Logger-STM32
can-caglar
104 × 43.3 mm76 parts2LNo license4Ch375serial
ChartreuseK
73.8 × 31.1 mm24 parts2LCERN-OHL-W-2.04Radio usb interface
SP8EBC
127 × 90 mm200 parts2LNo license3Dragon32Rev3
jimbro1000
253 × 169.1 mm169 parts2LMIT3ESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LNo license2Mvme buttress board
thorpej
115.1 × 233.7 mm45 parts4LNo license2PIC
Usb controller-32
jcksnvllxr80
194.3 × 109.2 mm93 parts2LNo license1STM32
Kedtracker
kedder
82.7 × 56.6 mm78 parts2LNo license1AVR/Arduino
InterfaceBoard
TeamMeanMachine
6.4 × 6.4 mm36 parts2LUnlicense1Raspberry Pi
RTE-for-RPI-Schematics
3mdeb
104 × 57.9 mm31 parts2LCERN-OHL-1.21RP2040/RP2350
Atari link
hildenborg
58 × 62 mm24 parts2LMIT1Flarmusb
kedder
47.2 × 21.8 mm22 parts2LNo license1- schematic only · 26 partsESP32
ESPHome serial controller
Renbrant
26 partsMIT1 ESP32
ELISTARS
R-Mutura
102 × 86.3 mm281 parts4LNo license0STM32
XBT Autolauncher 3.0
cxs1529
310 × 100 mm216 parts2LNo license0STM32
Keithley 615 Interface Board
farlepet
100 × 86 mm169 parts2LMIT0Ruggedpod electronics
RuggedPOD
312.8 × 215.4 mm141 parts4LNo license0STM32
Hw audio box
larus-breeze
79 × 51 mm116 parts4LCustom license0TI MSP430/CC
Sist Mic Mul Int
fjvizcaino
100.5 × 131.5 mm100 parts2LNo license0
How designs wire the MAX3232
Read from the KiCad layouts of 63 open source designs, one per repository: what each pin of the MAX3232 connects to, and the resistors, capacitors and other passives placed on it.
- The C1+ pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 1 µF).
- The C1- pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 1 µF).
- The C2+ pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 470 nF).
- The C2- pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| C1+pin 1 | Connected to: Signal 100% |
|
| VS+pin 2 | Connected to: Signal 97% |
|
| C1-pin 3 | Connected to: Signal 97% |
|
| C2+pin 4 | Connected to: Signal 98% |
|
| C2-pin 5 | Connected to: Signal 98% |
|
| VS-pin 6 | Connected to: Signal 100% |
|
| GNDpin 15 | Connected to: GND 89% | — |
| VCCpin 16 | Connected to: 3.3V 79% · a signal 21% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartSpin2k by doudar, Encoder by eddyem, Rs232-dual adapter by DangerousPrototypes and Socket by eddyem.
The MAX3232 in open source designs
The gallery holds 78 open source boards using the MAX3232 from 65 GitHub repositories; a typical one measures about 86.3 × 66.4 mm and carries around 45 components.
83% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.
The most starred is SmartSpin2k Panelized by doudar.
Parts used alongside the MAX3232
Microcontrollers on boards using the MAX3232
What boards using the MAX3232 are built for
MAX3232: common questions
Where can I find a MAX3232 reference design?
Each of the 78 boards on this page is a real design using the MAX3232. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MAX3232 C1+ pin connected?
The C1+ pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 63 open source designs using the MAX3232.
How is the MAX3232 C1- pin connected?
The C1- pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 63 open source designs using the MAX3232.
How is the MAX3232 C2+ pin connected?
The C2+ pin has a series capacitor on 61 of 63 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 63 open source designs using the MAX3232.
What parts are used alongside the MAX3232?
The AMS1117-3.3, CH340G, LM1117-3.3, AMS1117-5.0 and MCP23017 appear in the most repositories here.
Which microcontrollers do boards using the MAX3232 use?
Most are built on ESP32 (13), STM32 (13), RP2040/RP2350 (9) and Raspberry Pi (4).
How big is a typical board using the MAX3232?
The median is 86.3 × 66.4 mm, and 83% are two-layer designs.
What is the most popular open source board using the MAX3232?
By GitHub stars, SmartSpin2k Panelized by doudar, with 291 stars.
Can I simulate one of these boards using the MAX3232 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.