TECHIN514 W26 ShakeToWake final project
peerayad·TECHIN514_W26_ShakeToWake_final_project·hardware/Files/PCB/Sensor_pcb.kicad_pcb
About the TECHIN514 W26 ShakeToWake final project PCB
TECHIN514 W26 ShakeToWake final project is an open source PCB design by peerayad, published on GitHub. It is a 2-layer board measuring 38.1 × 35.6 mm, with 6 components from 6 distinct parts.
By type, the board carries 2 connectors, 1 IC, 1 switch, 1 diode and 1 resistor.
It belongs with the sensors, displays & leds and power & battery designs in this gallery.
From the project
A sensor device that detects motion and transmits data wirelessly to the bedside alarm unit via ESP-NOW.
A sensor device that detects motion and transmits data wirelessly to the bedside alarm unit via ESP-NOW.
How it works: 1. ADXL345 reads 3-axis acceleration every 100ms 2. Adaptive DSP pipeline processes raw data: - Delta Magnitude — L1-norm: |ΔX| + |ΔY| + |ΔZ| - SMA Filter (N=10) — 10-sample rolling average, removes sensor noise - Baseline Calibration — collects 10 samples at alarm start, computes threshold = μ + 3σ - Adaptive Threshold — auto-calibrated per device and orientation 3. Broadcasts motion packet to alarm unit via ESP-NOW every 100ms

TECHIN514 W26 ShakeToWake final project bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | XIAO_ESP32 | U1 |
| 1 | Conn_01x08_Pin ADLX345 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm | J2 |
| 1 | SW_SPST | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | SW1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | R | R_0603_1608Metric | R1 |
TECHIN514 W26 ShakeToWake final project design files
The KiCad project lives in the peerayad/TECHIN514_W26_ShakeToWake_final_project repository on GitHub; these links point at the commit this page was built from.
TECHIN514 W26 ShakeToWake final project: common questions
How big is the TECHIN514 W26 ShakeToWake final project PCB?
The TECHIN514 W26 ShakeToWake final project measures 38.1 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TECHIN514 W26 ShakeToWake final project?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the TECHIN514 W26 ShakeToWake final project design files?
From the peerayad/TECHIN514_W26_ShakeToWake_final_project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TECHIN514 W26 ShakeToWake final project design in my own project?
The repository has no license, so all rights stay with peerayad. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k