HardLabs

Mission Pegasus

Periksson1·missionpegasusPCB·Peter's Files/main-board/Mission Pegasus.kicad_pcb

Mission Pegasus PCB layout, top view — open source Raspberry Pi board by Periksson1

About the Mission Pegasus PCB

Mission Pegasus is an open source Raspberry Pi PCB design by Periksson1, published on GitHub. It is a 2-layer board measuring 90.2 × 95.9 mm, with 27 components from 11 distinct parts.

Its main chip is the AS72651, from the Raspberry Pi family. By type, the board carries 18 resistors, 3 connectors, 1 IC, 1 transistor, 1 inductor and 1 capacitor.

From the project

KiCad design for the Mission Pegasus board — a Raspberry Pi Zero based carrier with an AMS AS7265x spectral sensor front end.

KiCad design for the Mission Pegasus board — a Raspberry Pi Zero based carrier with an AMS AS7265x spectral sensor front end.

Open Mission Pegasus.kicadpro` in KiCad (10.0 or newer).

All library and 3D-model paths are project-relative (${KIPRJMOD}), so the repo is self-contained — clone it anywhere and it opens without missing files.

The symbols cached in the schematics (AS72652 / AS72653 / RASPBERRYPIZERO2W) are the authoritative, complete versions and match the PCB. The library copies are older/incomplete. Do not run Tools → Update Symbols from Library_** on these parts — it would pull…

Main components on the Mission Pegasus

AS72651

Mission Pegasus bill of materials (BOM)

27 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AS72651
RASPBERRY_PI_ZERO_2_W
U1
1
DTC113Z
Q1
3
FTSH-105-04-L-D-RA
J2, J3, J4
2
PC/104 Connector
H7, H8
1
60R/250MA
60R/250mA
L1
1
100NF
100nF
C1
3
10K
0R
R1, R2, R5
1
2.2k
R3
1
10K
2.2k
R4
2
2.2K
0R
R6, R7
11
0R
R8, R9, R10, R11, R12, R13, R14, R15 +3

Mission Pegasus design files

The KiCad project lives in the Periksson1/missionpegasusPCB repository on GitHub; these links point at the commit this page was built from.

Mission Pegasus: common questions

What microcontroller does the Mission Pegasus use?

The Mission Pegasus is built around the AS72651, from the Raspberry Pi family.

How big is the Mission Pegasus PCB?

The Mission Pegasus measures 90.2 × 95.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mission Pegasus?

27 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mission Pegasus design files?

From the Periksson1/missionpegasusPCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mission Pegasus design in my own project?

The repository has no license, so all rights stay with Periksson1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mission Pegasus without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in missionpegasusPCB

Similar boards