Autotome panel
permafrost06·autotome·pcb/autotome-panel.kicad_pcb
About the Autotome panel PCB
Autotome panel is an open source PCB design by permafrost06, published on GitHub. It is a 2-layer board measuring 216.4 × 118.5 mm, with 124 components from 8 distinct parts.
Other key parts include the ProMicro. By type, the board carries 56 switches, 56 diodes, 2 ICs, 2 connectors and 2 battery holders.
Main components on the Autotome panel
Autotome panel bill of materials (BOM)
124 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ProMicro | NiceNano | U1, U2 |
| 2 | CONN_01X01_PIN Conn_01x01_Pin | TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J1, J2 |
| 2 | Battery_Cell | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BT1, BT2 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | RE1D1, RE1D2 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | RE1SW1, RE1SW2 |
| 2 | SW_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SLSW1, SLSW2 |
| 56 | SW_PUSH | SW_Hotswap_Kailh_MX_Plated_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +48 |
| 56 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +48 |
Autotome panel design files
The KiCad project lives in the permafrost06/autotome repository on GitHub; these links point at the commit this page was built from.
Autotome panel: common questions
How big is the Autotome panel PCB?
The Autotome panel measures 216.4 × 118.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Autotome panel?
124 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Autotome panel design files?
From the permafrost06/autotome repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Autotome panel design in my own project?
The repository has no license, so all rights stay with permafrost06. Use it as a reference, and ask the author before reusing the design.