Medical Imaging Ultrasound fromScratch

peteryazdi·Medical_Imaging_Ultrasound_fromScratch·rev0/PCB/rev0_Tx_Circuit.kicad_pcb

Medical Imaging Ultrasound fromScratch PCB layout, top view — open source board by peteryazdi

About the Medical Imaging Ultrasound fromScratch PCB

Medical Imaging Ultrasound fromScratch is an open source PCB design by peteryazdi, published on GitHub. It is a 4-layer board measuring 91.6 × 91 mm, with 31 components from 11 distinct parts.

Other key parts include the MD1213 and LM2776. By type, the board carries 18 capacitors, 4 diodes, 4 resistors, 3 ICs and 2 transistors.

From the project

Multi-Channel Ultrasound Imaging System

An ultrasound imaging system built from scratch: high-voltage transmit electronics, a receive chain, digitization and FPGA beamforming. Self-funded personal project.

Rev 0 is a 4-layer board that drives two transducers with bipolar high-voltage pulses. On each channel an MD1213 gate driver switches a TC6320 complementary MOSFET pair between the +HV and -HV rails. The gate drive is AC-coupled through 10 nF / 200 V capacitors, so the ±5 V driver outputs can control MOSFETs whose sources sit on the high-voltage rails. Back-to-back ES1D diodes clamp each transmit node, and each channel leaves…

Medical Imaging Ultrasound fromScratch, from the project README
From the project README

Main components on the Medical Imaging Ultrasound fromScratch

MD1213LM2776

Medical Imaging Ultrasound fromScratch bill of materials (BOM)

31 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MD1213
U1, U2
1
LM2776
U3
2
TC6320
Q1, Q2
4
ES1D
D5, D9, D10, D11
1
C1731
2.2uF 16V
C3
6
C381468
1uF 250V
C4, C5, C11, C14, C17, C21
1
1UF
1uF
C6
4
C49955
0.47uF 50V
C7, C10, C13, C16
2
C24123
1uF 16V
C8, C19
4
C106844
10nF 200V
C9, C12, C15, C18
4
10K
R12, R13, R15, R16

Medical Imaging Ultrasound fromScratch design files

The KiCad project lives in the peteryazdi/Medical_Imaging_Ultrasound_fromScratch repository on GitHub; these links point at the commit this page was built from.

Medical Imaging Ultrasound fromScratch: common questions

How big is the Medical Imaging Ultrasound fromScratch PCB?

The Medical Imaging Ultrasound fromScratch measures 91.6 × 91 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Medical Imaging Ultrasound fromScratch?

31 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Medical Imaging Ultrasound fromScratch design files?

From the peteryazdi/Medical_Imaging_Ultrasound_fromScratch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Medical Imaging Ultrasound fromScratch design in my own project?

The repository has no license, so all rights stay with peteryazdi. Use it as a reference, and ask the author before reusing the design.