25 open source boards using the LM2776
Real designs built with the LM2776, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vna mm synth
loxodes
314.5 × 201 mm428 parts6LNo license205FPGA
Scopefun hardware
OWON-LILLIPUT
100 × 160 mm593 parts6LCustom license6BionicTMS9900
tgtakaoka
30.5 × 88.9 mm35 parts4LCustom license6ESP32
Osciloscope-ESP32
cristobalcuevas
137.5 × 42.5 mm79 parts2LNo license4ESP32
ARG OSCI HARDWARE
ArgOsciProyect
113 × 50 mm56 parts2LCustom license3STM32
MainBoard
hughe349
120 × 135 mm139 parts4LGPL-3.02Medical Imaging Ultrasound fromScratch
peteryazdi
91.6 × 91 mm31 parts4LNo license2LAB3
lengoctuong2005
50 × 50 mm38 parts2LNo license1AVR/Arduino
Soylent
kulp
17.8 × 22.9 mm24 parts2LNo license1FPGA
Data sampling
J1DDERY
76.8 × 160.6 mm405 parts6LNo license0RP2040/RP2350
DualPreRegPowerSupply
janni0609
99.6 × 100 mm351 parts4LNo license0STM32
SENTINEL-UHF T/R Module, 420-450 MHz, 300 W
ajisrawi
230 × 152 mm140 parts4LNo license0ESP8266
Avalon communication board
AvalonROV
100 × 62.1 mm115 parts2LNo license0ESP32
EEG EMT 32
Raigetix
60 × 80 mm115 parts2LNo license0Sipm testbench
brunogle
95 × 60 mm110 parts4LNo license0RP2040/RP2350
JamRF
Arcioth
120 × 90 mm61 parts4LCERN-OHL-P-2.00SignleCellBoard
hughe349
95.3 × 105.4 mm37 parts2LGPL-3.02Lps regulator rev 12
jerryok826
136.2 × 62.6 mm122 parts2LMIT1Thiet lap PCB, Stackup va Design Rules
lengoctuong2005
50 × 50 mm38 parts2LNo license1BDCMotorControlShieldMega
nunosousa
150 × 72 mm264 parts2LMIT0Microchip SAM
Tooling Board
EasternEdgeRobotics
104.7 × 67.4 mm92 parts2LMIT2Video Converter
AvalonROV
49 × 59.5 mm39 parts2LNo license0Sequencing ltc2937
loxodes
58 × 56 mm153 parts4LNo license205Psu
OpenSiPM
23 × 22.2 mm14 parts2LMIT44Amp macom vga
loxodes
27 × 31.5 mm48 parts4LNo license205
How designs wire the LM2776
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the LM2776 connects to, and the resistors, capacitors and other passives placed on it.
- The C1+ pin has a series capacitor on 19 of 19 designs, most often 1 µF (then 220 nF).
- The C1- pin has a series capacitor on 19 of 19 designs, most often 1 µF (then 220 nF).
- The VIN pin has a decoupling capacitor on 16 of 19 designs, most often 2.2 µF (then 100 nF).
- The VOUT pin has a decoupling capacitor on 15 of 19 designs, most often 2.2 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOUTpin 1 | Connected to: -5V 63% · a signal 32% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VINpin 3 | Connected to: 5V 89% |
|
| ENpin 4 | Connected to: 5V 74% · a signal 16% | — |
| C1+pin 5 | Connected to: Signal 100% |
|
| C1-pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amp macom vga by loxodes, Psu by OpenSiPM, Scopefun hardware by OWON-LILLIPUT and BionicTMS9900 by tgtakaoka.
The LM2776 in open source designs
The gallery holds 25 open source boards using the LM2776 from 20 GitHub repositories; a typical one measures about 95.3 × 67.4 mm and carries around 92 components.
52% are two-layer designs, the rest use four layers or more, and 28% carry an open source license.
The most starred is Vna mm synth by loxodes.
Parts used alongside the LM2776
Microcontrollers on boards using the LM2776
What boards using the LM2776 are built for
LM2776: common questions
Where can I find a LM2776 reference design?
Each of the 25 boards on this page is a real design using the LM2776. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM2776 C1+ pin connected?
The C1+ pin has a series capacitor on 19 of 19 designs, most often 1 µF (then 220 nF). Counted from the KiCad layouts of 19 open source designs using the LM2776.
How is the LM2776 C1- pin connected?
The C1- pin has a series capacitor on 19 of 19 designs, most often 1 µF (then 220 nF). Counted from the KiCad layouts of 19 open source designs using the LM2776.
What decoupling capacitors do designs use on the LM2776 VIN pin?
The VIN pin has a decoupling capacitor on 16 of 19 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 19 open source designs using the LM2776.
What parts are used alongside the LM2776?
The AD8337, ADA4817-1, ADA4932-1, AZ4558C and CYUSB3014 appear in the most repositories here.
Which microcontrollers do boards using the LM2776 use?
Most are built on ESP32 (3), FPGA (2), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the LM2776?
The median is 95.3 × 67.4 mm, and 52% are two-layer designs.
What is the most popular open source board using the LM2776?
By GitHub stars, Vna mm synth by loxodes, with 205 stars.
Can I simulate one of these boards using the LM2776 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.