Final Board-Analog v3

Petros-Kapetanios·Senior-Design·Final_Board-Analog-v3/Final_Board-Analog-v3.kicad_pcb

About the Final Board-Analog v3

Final Board-Analog v3 is an open source PCB design by Petros-Kapetanios, published on GitHub. It is a 2-layer board measuring 79.3 × 87.5 mm, with 54 components from 30 distinct parts.

Other key parts include the 12 V Regulator, 5 V Regulator and LM358. By type, the board carries 15 connectors, 15 resistors, 13 capacitors, 3 ICs, 3 diodes and 2 transformers.

From the project

Zip files of my Gerber files for each PCB I created for my watt‑meter project.

1. Capacitor Test Board 2. Current Transformer Test Board 3. Voltage Transformer Test Board 4. Low Pass‑V1 5. Low Pass‑V2 6. FinalBoard‑Analog‑v1 7. FinalBoard‑Analog‑v2 8. FinalBoard‑Analog‑v3 9. FinalBoard‑v1 10. FinalBoard‑v2 11. FinalBoard‑v3‑Triple‑Transformer 12. FinalBoard‑v3B 13. FinalBoard‑v3B‑Mark’s Copy 14. FinalBoard‑v3C 15. FinalBoard‑v3D

Main components on the Final Board-Analog v3

12 V Regulator 5 V Regulator LM358

Final Board-Analog v3 bill of materials (BOM)

54 components, 30 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	12 V Regulator	TO-220-3_Vertical	U1
1	5 V Regulator	TO-220-3_Vertical	U2
1	LM358	DIP-8_W7.62mm	U4
2	CONN_01X02_PIN Hole	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J1, J4
1	CONN_02X03_ODD_EVEN Hole	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J2
1	Hole	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J3
1	CONN_01X04_PIN Wire	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J5
2	CONN_01X02_SOCKET Wire	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J6, J7
2	CONN_01X01_PIN Wire	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J8, J10
6	Wire	SolderWire-2sqmm_1x01_D2mm_OD3.9mm	J11, J12, J13, J14, J15, J16
1	Fuse	Fuseholder_Keystone_3555-2	F1
2	R_Potentiometer	Potentiometer_ACP_CA6-H2,5_Horizontal	RV1, RV2
1	VPP12-800 FS20-055-C2	XFMR_FS20-055-C2	T1
1	CSE185L	XFMR_CSE185L	T2
1	BAS3007 W04G	Diode_Bridge_Round_D9.8mm	D1
1	BAS3007 D_Zener	D_A-405_P10.16mm_Horizontal	D2
1	D_Zener	D_A-405_P10.16mm_Horizontal	D3
1	100 uF	CP_Radial_D10.0mm_P5.00mm	C1
4	1 uF	C_Disc_D4.7mm_W2.5mm_P5.00mm	C2, C3, C4, C5
4	1.5 uF	C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2	C8, C9, C14, C15

Show 10 more

Qty	Part	Footprint	Refs
1	22 nF	C_Disc_D4.7mm_W2.5mm_P5.00mm	C10
1	20 nF	C_Rect_L7.5mm_W6.5mm_P5.00mm	C11
2	10 nF	C_Disc_D4.7mm_W2.5mm_P5.00mm	C12, C13
1	3 K	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R1
1	51.1k	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R2
1	51.1 K	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R3
2	20 K	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R4, R5
8	10 K	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R6, R7, R9, R10, R11, R12, R13, R14
1	1 K	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R8
1	30	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R15

Final Board-Analog v3 design files

The KiCad project lives in the Petros-Kapetanios/Senior-Design repository on GitHub; these links point at the commit this page was built from.

Final Board-Analog v3: common questions

How big is the Final Board-Analog v3?

The Final Board-Analog v3 measures 79.3 × 87.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Final Board-Analog v3?

54 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Final Board-Analog v3 design files?

From the Petros-Kapetanios/Senior-Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.