Fezzesarecool elec
PhenixRobotik·fezzesarecool-elec
About the Fezzesarecool elec PCB
Fezzesarecool elec is an open source PCB design by PhenixRobotik, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 55 components from 30 distinct parts.
Other key parts include the MCP2515-EST, TCAN332, SN74AHC1G08, MC34152 and LM4991. By type, the board carries 14 resistors, 12 capacitors, 11 connectors, 6 ICs, 4 diodes and 3 transistors.
Main components on the Fezzesarecool elec
Fezzesarecool elec bill of materials (BOM)
55 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2515-EST | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | TCAN332 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SN74AHC1G08 | SOT-23-5_HandSoldering | U3 |
| 2 | MC34152 | SOIC-8_3.9x4.9mm_P1.27mm | U11, U12 |
| 1 | LM4991 | SOIC-8_3.9x4.9mm_P1.27mm | U13 |
| 3 | NMOS-T252 | TO-252-2 | Q1, Q2, Q3 |
| 1 | Crystal_8MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_sel | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_start | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 2 | CAN_conn | JST_XH_B05B-XH-A_1x05_P2.50mm_Vertical | J3, J4 |
| 1 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | Conn_01x10 | JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J6 |
| 1 | alim_5V | PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J7 |
| 1 | Conn_LEDs | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J14 |
| 1 | Audio_input | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J15 |
| 1 | alim_jacky | PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J18 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | P1 |
| 2 | Fuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1, F3 |
| 1 | reset_method | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Speaker | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | LS1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D4 |
| 2 | D | D_2114_3652Metric_Pad1.85x3.75mm_HandSolder | D2, D6 |
| 2 | 26p | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 5 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C10, C11, C13 |
| 1 | cf. doc p55 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 10µ | CP_Elec_8x10 | C12 |
| 1 | 0,39u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14 |
| 2 | 1u | CP_Elec_4x5.4 | C15, C16 |
| 12 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
| 2 | 20k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11 |
Fezzesarecool elec design files
The KiCad project lives in the PhenixRobotik/fezzesarecool-elec repository on GitHub; these links point at the commit this page was built from.
Fezzesarecool elec: common questions
How big is the Fezzesarecool elec PCB?
The Fezzesarecool elec measures 65 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fezzesarecool elec?
55 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fezzesarecool elec design files?
From the PhenixRobotik/fezzesarecool-elec repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Fezzesarecool elec design in my own project?
The repository has no license, so all rights stay with PhenixRobotik. Use it as a reference, and ask the author before reusing the design.