10 open source boards using the MCP2515-EST

Real designs built with the MCP2515-EST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP2515-EST

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP2515-EST connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 is left unconnected on 5 of 5 designs.
  • Pin 6 is left unconnected on 5 of 5 designs.
  • Pin 10 is tied to GND on 5 of 5 designs.
  • Pin 15 is left unconnected on 5 of 5 designs.
Pin 3Connected to: Not connected 100%
Pin 4Connected to: Not connected 60% · GND 20% · a signal 20%
Pin 5Connected to: Not connected 60% · GND 20% · a signal 20%
Pin 6Connected to: Not connected 100%
Pin 7Connected to: Not connected 60% · GND 20% · a signal 20%
Pin 8Connected to: Signal 60% · not connected 40%
  • Crystal on 60% · 16 MHz (1), 20 MHz (1), 8 MHz (1)
  • Capacitor to GND on 60% · 18 pF (1), 15 pF (1), 26 pF (1)
Pin 9Connected to: Signal 100%
  • Crystal on 60% · 16 MHz (1), 20 MHz (1), 8 MHz (1)
  • Capacitor to GND on 60% · 18 pF (1), 15 pF (1), 26 pF (1)
  • Series resistor on 40% · 120 Ω (1), 1 MΩ (1)
Pin 10Connected to: GND 100%
Pin 11Connected to: Not connected 80% · a signal 20%
Pin 12Connected to: Not connected 80% · a signal 20%
Pin 15Connected to: Not connected 100%
Pin 19Connected to: Not connected 40% · 5V 20% · a signal 40%
  • Series resistor on 40% · 10 kΩ (1)
Pin 20Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (7)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Jeep canbus by latonita, Beetle by Autohome2, LabnodeCAN by das-labor and Gimble Goblin by MST-Robotics.

The MCP2515-EST in open source designs

The gallery holds 10 open source boards using the MCP2515-EST from 5 GitHub repositories; a typical one measures about 68.2 × 53.7 mm and carries around 44 components.

100% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is Jeep canbus by latonita.

Parts used alongside the MCP2515-EST

Microcontrollers on boards using the MCP2515-EST

What boards using the MCP2515-EST are built for

MCP2515-EST: common questions

Where can I find a MCP2515-EST reference design?

Each of the 10 boards on this page is a real design using the MCP2515-EST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP2515-EST pin 3 connected?

Pin 3 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP2515-EST.

How is the MCP2515-EST pin 6 connected?

Pin 6 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP2515-EST.

How is the MCP2515-EST pin 10 connected?

Pin 10 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MCP2515-EST.

Which microcontrollers do boards using the MCP2515-EST use?

Most are built on AVR/Arduino (7) and Microchip SAM (2).

How big is a typical board using the MCP2515-EST?

The median is 68.2 × 53.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the MCP2515-EST?

By GitHub stars, Jeep canbus by latonita, with 30 stars.

Can I simulate one of these boards using the MCP2515-EST before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part