Pinball Control board
About the Pinball Control board
Pinball Control board is an open source PCB design by Phil-CIA, published on GitHub. It is a 2-layer board measuring 87.1 × 100 mm, with 79 components from 22 distinct parts.
Other key parts include the TPS1H200AQDGNRQ1. By type, the board carries 24 diodes, 24 resistors, 20 capacitors, 5 ICs, 4 connectors and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This folder contains the hardware design files for the Captain Fantastic base control board and its companion HAT board.
Main components on the Pinball Control board
Pinball Control board bill of materials (BOM)
79 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TPS1H200AQDGNRQ1 | SOP65P490X110-9N | U1, U2, U3, U4, U5 |
| 1 | Connector C | CONN_SDA-41792_M450_23_MOL | J1 |
| 2 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J2, J4 |
| 1 | B4B-XH-A | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 2 | test switch | Slide Sw LCSC#C7498220 | SW1, SW2 |
| 6 | Red Foshan NationStar Optoelectronics | D_0805 | D1, D10, D11, D12, D13, D14 |
| 1 | Yellow Hubei KENTO Elec | D_0805 | D2 |
| 4 | 1N5819WS Guangdong Hottech | D_SOD-323 | D3, D4, D7, D8 |
| 1 | Green Hubei KENTO Elec | D_0805 | D5 |
| 2 | White Hubei KENTO Elec | D_0805 | D6, D9 |
| 5 | US1M MDD（Microdiode Electronics） | D_SMA | D15, D17, D19, D21, D23 |
| 5 | SMCJ30CA hongjiacheng | D_SMC | D16, D18, D20, D22, D24 |
| 6 | 1uF Samsung Electro-Mechanics | C_0805 | C1, C2, C5, C6, C11, C12 |
| 11 | 100nF YAGEO | C_0805 | C3, C4, C9, C10, C14, C15, C16, C17 +3 |
| 3 | 100uf, 35V | CP_Radial_D6.3mm_P2.50mm | C7, C8, C13 |
| 2 | 680Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R3 |
| 2 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R2, R4 |
| 2 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R5, R6 |
| 7 | 2.4kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R7, R8, R20, R21, R22, R23, R24 |
| 1 | 270Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 220Ω UNI-ROYAL(Uniroyal Elec) | R_0805 | R10, R11, R12, R13, R14 |
| 5 | 1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R15, R16, R17, R18, R19 |
Pinball Control board design files
The KiCad project lives in the Phil-CIA/Captain-Fantastic-Control-and-Hat-Board repository on GitHub; these links point at the commit this page was built from.
Pinball Control board: common questions
How big is the Pinball Control board?
The Pinball Control board measures 87.1 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pinball Control board?
79 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pinball Control board design files?
From the Phil-CIA/Captain-Fantastic-Control-and-Hat-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pinball Control board design in my own project?
The repository has no license, so all rights stay with Phil-CIA. Use it as a reference, and ask the author before reusing the design.
More boards in Captain-Fantastic-Control-and-Hat-Board
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979