Stm32g4-automotive devboard
phoenix-prog·stm32g4-automotive-devboard·hardware/stm32g4-automotive-devboard/MCU_Core.kicad_sch
About the Stm32g4-automotive devboard PCB
Stm32g4-automotive devboard is an open source STM32 PCB design by phoenix-prog, published on GitHub under the MIT license. It is a board, with 1 components from 1 distinct parts.
Its main chip is the STM32G431CBTx, from the STM32 family.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
From the project
Open-source development board designed for automotive CAN bus applications, built to survive harsh vehicle electrical environments.
Open-source development board designed for automotive CAN bus applications, built to survive harsh vehicle electrical environments.
Current Phase: Schematic Design (Week 1 of 12) Target Completion: July 2026
- MCU: STM32G431CBT6 (Cortex-M4F @ 170MHz, 128KB Flash, 32KB RAM) - Dual CAN: Automotive-grade transceivers (TJA1051) with galvanic isolation - Power Input: 6-36V with reverse polarity protection, TVS transient suppression - USB: USB-C for programming, debugging, and serial communication - Storage: Micro-SD card slot for data logging - RTC: Real-time clock with CR2032 battery backup -…
Main components on the Stm32g4-automotive devboard
Stm32g4-automotive devboard bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
Stm32g4-automotive devboard design files
The KiCad project lives in the phoenix-prog/stm32g4-automotive-devboard repository on GitHub; these links point at the commit this page was built from.
Stm32g4-automotive devboard: common questions
What microcontroller does the Stm32g4-automotive devboard use?
The Stm32g4-automotive devboard is built around the STM32G431CBTx, from the STM32 family.
How many components are on the Stm32g4-automotive devboard?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32g4-automotive devboard design files?
From the phoenix-prog/stm32g4-automotive-devboard repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32g4-automotive devboard design in my own project?
Yes, under the terms of its MIT license, which phoenix-prog chose for the repository.
Can I test firmware for the Stm32g4-automotive devboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k