HardLabs

Lcd connector

phorton1·Arduino-cnc-cnc3018·docs/kicad/lcd_connector/lcd_connector.kicad_pcb

Lcd connector PCB layout, top view — open source board by phorton1

About the Lcd connector PCB

Lcd connector is an open source PCB design by phorton1, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 17.8 × 38.1 mm, with 19 components from 12 distinct parts.

By type, the board carries 8 connectors, 2 resistors and 1 module.

It belongs with the robotics & motion, iot & wireless and displays & leds designs in this gallery.

From the project

A FluidNC based implementation of a controller for a cheap cnc3028 machine

Home -- History -- Hardware -- Electronics -- Software -- Installation -- Version2

esp32cnc3018 is my implementation of an inexpensive 3-axis CNC machine that makes use of the ESP32** processor. Essentially I bought the cheapest 3-axis CNC machine I could find on Ebay, and then designed and implemented my own controller board, limit switches, and extensions to that machine.

Lcd connector, from the project README
From the project README

Lcd connector bill of materials (BOM)

19 components, 12 distinct parts.

QtyPartRefs
1
TFT_ILI9341
M1
1
5V
J1
1
T_CS
J2
1
CLK
J3
1
MISO
J4
1
DC
J5
1
CS
J6
1
MOSI
J7
1
GND
J8
8
Conn_01x01
V1, V2, V3, V5, V6, V7, V8, V9
1
100
R1
1
10K
R2

Lcd connector design files

The KiCad project lives in the phorton1/Arduino-cnc-cnc3018 repository on GitHub; these links point at the commit this page was built from.

Lcd connector: common questions

How big is the Lcd connector PCB?

The Lcd connector measures 17.8 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lcd connector?

19 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lcd connector design files?

From the phorton1/Arduino-cnc-cnc3018 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Lcd connector design in my own project?

Yes, under the terms of its GPL-3.0 license, which phorton1 chose for the repository.

More boards in Arduino-cnc-cnc3018

Similar boards