T2 Buzzinator

piercehowell·T2_Buzzinator·Hardware/Programmable_Timed_Buzzer/Programmable_Timed_Buzzer.kicad_pcb

T2 Buzzinator PCB layout, top view — open source board by piercehowell

About the T2 Buzzinator PCB

T2 Buzzinator is an open source PCB design by piercehowell, published on GitHub under the MIT license. It is a 2-layer board measuring 63.5 × 61 mm, with 23 components from 17 distinct parts.

Other key parts include the LM555xN. By type, the board carries 6 capacitors, 5 resistors, 2 ICs, 2 connectors, 2 switches and 2 test points.

From the project

T2 Buzzinator - Programmable Timed Buzzer

The T2 Buzzinator is an adjustable timed buzzer circuit emitting noise from a magnetic transducer buzzer for a programmable duration of time. The buzz time duration is programmed simply by a potentiometer and swtich. The T2 Buzzinator is built around two 555 Timer ICs and other discrete components.

This repo contains the KiCAD schematic and PCB design of the Buzzinator, as well as other supporting documents (Bill of Materials (BOM), LTSpice simulation, etc.)

T2 Buzzinator, from the project README
From the project README

Main components on the T2 Buzzinator

T2 Buzzinator bill of materials (BOM)

23 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
LM555xN
U1, U2
1
2N7000
Q1
2
Conn_01x01
J1, J2
1
R_POT_US
1M1
1
CEM-1212S
BZ1
1
SW_Push
SW1
1
SW_DPDT_x2
SW2
2
TestPoint
TP1, TP2
1
1N4001
D1
4
0.1u
C1, C4, C5, C6
1
10u
C2
1
100u
C3
1
100k
R1
1
2.2k
R2
1
100
R3
1
0
R4
1
160
R5

T2 Buzzinator design files

The KiCad project lives in the piercehowell/T2_Buzzinator repository on GitHub; these links point at the commit this page was built from.

T2 Buzzinator: common questions

How big is the T2 Buzzinator PCB?

The T2 Buzzinator measures 63.5 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the T2 Buzzinator?

23 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the T2 Buzzinator design files?

From the piercehowell/T2_Buzzinator repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the T2 Buzzinator design in my own project?

Yes, under the terms of its MIT license, which piercehowell chose for the repository.