Rgbpmod
pimdegroot·rgbpmod
About the Rgbpmod PCB
Rgbpmod is an open source PCB design by pimdegroot, published on GitHub. It is a 2-layer board measuring 59.1 × 20.3 mm, with 52 components from 8 distinct parts.
Other key parts include the GM1640. By type, the board carries 40 diodes, 4 capacitors, 4 resistors, 2 switches, 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
A RGB LED matrix pmod using the GN1640 driver chip
The leds used are: https://lcsc.com/product-detail/Light-Emitting-Diodes-LEDFoshan-NationStar-Optoelectronics-FC-B1010RGBT-HGC158099.html
And the driver is: https://lcsc.com/product-detail/LED-DriversGN-GN1640C265478.html
Note that the TM1640 is pin compatible and an english datasheet can be found for that chip.
When replicating this project it is highly recommended to order a stencil and use solder paste to solder the LEDs
Main components on the Rgbpmod
Rgbpmod bill of materials (BOM)
52 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GM1640 | SOIC-28W_7.5x17.9mm_P1.27mm | U1 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 2 | SW_Push | SW | SW1, SW2 |
| 40 | LED_ARGB | 0404_RGB_LED | D1, D2, D3, D4, D5, D6, D7, D8 +32 |
| 2 | 100n | C_0805_2012Metric | C1, C2 |
| 1 | 100uf | CP_Elec_5x5.4 | C3 |
| 1 | 100nf | C_0805_2012Metric | C4 |
| 4 | 10k | R_0805_2012Metric | R1, R2, R3, R4 |
Rgbpmod design files
The KiCad project lives in the pimdegroot/rgbpmod repository on GitHub; these links point at the commit this page was built from.
- Layoutrgbpmod.kicad_pcb
Rgbpmod: common questions
How big is the Rgbpmod PCB?
The Rgbpmod measures 59.1 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rgbpmod?
52 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rgbpmod design files?
From the pimdegroot/rgbpmod repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rgbpmod design in my own project?
The repository has no license, so all rights stay with pimdegroot. Use it as a reference, and ask the author before reusing the design.
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k