Suma v-0-rev a

piruetasxyz·suma·hardware/suma-v-0-rev-a/suma-v-0-rev-a.kicad_pcb

Suma v-0-rev a PCB layout, top view — open source board by piruetasxyz

About the Suma v-0-rev a PCB

Suma v-0-rev a is an open source PCB design by piruetasxyz, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 25 × 100 mm, with 22 components from 8 distinct parts.

Other key parts include the TL072. By type, the board carries 8 resistors, 6 connectors, 2 diodes, 2 capacitors and 1 IC.

From the project

popusintes - suma

suma is an open source hardware Eurorack mixer module by piruetas, part of popusintes. It sums three inputs, each with its own potentiometer, into one output, using a TL072 dual op amp (rev-a also had an inverted output, removed in rev-b). The board is made in KiCad 10 with its own local symbol, footprint and 3D model libraries, included in each revision's bibliotecas/ folder, and the panel is made in OpenSCAD with the shared modules from popusintes-cajas-paneles, included as a git submodule in terceros/. Hardware is licensed under CERN-OHL-P-2.0, and the panel and documentation under…

Main components on the Suma v-0-rev a

Suma v-0-rev a bill of materials (BOM)

22 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TL072
U1
5
AudioJack2_SwitchT
J1, J2, J3, J5, J6
1
Conn_02x05_Odd_Even
J4
3
A100k
RV1, RV2, RV3
2
1N5817W
D1, D2
2
100N
100n
C1, C2
6
100K
100k
R1, R2, R3, R4, R5, R6
2
1k
R7, R8

Suma v-0-rev a design files

The KiCad project lives in the piruetasxyz/suma repository on GitHub; these links point at the commit this page was built from.

Suma v-0-rev a: common questions

How big is the Suma v-0-rev a PCB?

The Suma v-0-rev a measures 25 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Suma v-0-rev a?

22 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Suma v-0-rev a design files?

From the piruetasxyz/suma repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Suma v-0-rev a design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which piruetasxyz chose for the repository.

More boards in suma