Astra
pjwoodard·astra·hardware/astra_flight/astra.kicad_pcb
About the Astra PCB
Astra is an open source STM32 PCB design by pjwoodard, published on GitHub. It is a 2-layer board measuring 41 × 31 mm, with 28 components from 17 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.
Main components on the Astra
Astra bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J4 |
| 1 | FTSH-107-01-F-DV-K-P-TR | SAMTEC_FTSH-107-01-F-DV-K-P-TR | J5 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 5 | 100n | C_0402_1005Metric | C1, C2, C3, C4, C12 |
| 1 | 10u | C_0603_1608Metric | C5 |
| 1 | 10n | C_0402_1005Metric | C6 |
| 2 | 1u | C_0402_1005Metric | C7, C8 |
| 2 | 10p | C_0402_1005Metric | C9, C11 |
| 2 | 22u | C_0805_2012Metric | C10, C13 |
| 1 | 10k | R_0402_1005Metric | R1 |
| 4 | 1k5 | R_0402_1005Metric | R2, R3, R4, R5 |
Astra design files
The KiCad project lives in the pjwoodard/astra repository on GitHub; these links point at the commit this page was built from.
Astra: common questions
What microcontroller does the Astra use?
The Astra is built around the STM32F103C8Tx, from the STM32 family.
How big is the Astra PCB?
The Astra measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Astra?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Astra design files?
From the pjwoodard/astra repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Astra design in my own project?
The repository has no license, so all rights stay with pjwoodard. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Astra without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k