Gate O Matix
Pl0p·Gate_O_Matix·Kicad_Project/Main_board.kicad_pcb
About the Gate O Matix PCB
Gate O Matix is an open source PCB design by Pl0p, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 204 × 111 mm, with 130 components from 15 distinct parts.
Other key parts include the 74HC595 and 7_segment_3_digit_2831AS. By type, the board carries 55 diodes, 44 resistors, 20 switches, 5 ICs and 3 connectors.
From the project
Digital sequencer (In progress)
- #### SCHEMATIC & PCB - [ ] Resistor value for LED & screen - [ ] Drawing CPUBoard - [ ] Drawing OutputBoard
- #### SOFTWARE - [ ] Clock multiplier/divider per part - [ ] Detect clock internal/external (switching jack) - [ ] Reset -> interupt - [ ] Patern choice - [ ] Save/Load (SD card)
- #### HARDWARE - [ ] Use blue pills for Master - [ ] Add SD card - [ ] 12v alimentation - [ ] Buffered output
Main components on the Gate O Matix
Gate O Matix bill of materials (BOM)
130 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74HC595 | DIP-16_Socket | U1, U2, U3, U4 |
| 1 | 7_segment_3_digit_2831AS | 7-Segment_2831AS | U5 |
| 1 | Data & Power | IDC-Header_2x05 | J1 |
| 1 | Data 2 | IDC-Header_2x08 | J2 |
| 1 | Data 3 | IDC-Header_2x08 | J3 |
| 3 | Rotary_Encoder_Switch | RotaryEncoder | Encoder_1, Encoder_2, Encoder_3 |
| 20 | SW_Push | SW_PUSH-12mm(deported) | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +12 |
| 16 | LED_BLUE | LED_5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 16 | LED_GREEN | LED_5.0mm | D17, D18, D19, D20, D21, D22, D23, D24 +8 |
| 20 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D33, D34, D35, D36, D37, D38, D39, D40 +12 |
| 3 | LED | LED_5.0mm | D53, D54, D55 |
| 32 | R | Resistance | R1, R2, R3, R4, R5, R6, R7, R8 +24 |
| 3 | ? | Resistance | R33, R34, R35 |
| 6 | 50k | Resistance | R36, R37, R38, R39, R40, R41 |
| 3 | 220 | Resistance | R42, R43, R44 |
Gate O Matix design files
The KiCad project lives in the Pl0p/Gate_O_Matix repository on GitHub; these links point at the commit this page was built from.
Gate O Matix: common questions
How big is the Gate O Matix PCB?
The Gate O Matix measures 204 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gate O Matix?
130 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gate O Matix design files?
From the Pl0p/Gate_O_Matix repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Gate O Matix design in my own project?
Yes, under the terms of its CC0-1.0 license, which Pl0p chose for the repository.