Sensor
pluyckx·SensorPcb
About the Sensor PCB
Sensor is an open source STM32 PCB design by pluyckx, published on GitHub. It is a 2-layer board measuring 49 × 49 mm, with 58 components from 28 distinct parts.
Its main chip is the STM32L051K8T6, from the STM32 family. Other key parts include the MCP60x4, HTU21D, PIR, TPS79718 and EPL3015. By type, the board carries 20 capacitors, 20 resistors, 7 ICs, 4 transistors, 3 connectors and 2 switches.
It belongs with the sensors designs in this gallery.
From the project
A repository for the Kicad project of the sensor pcb
Main components on the Sensor
Sensor bill of materials (BOM)
58 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L051K8T6 | STM32L051-LQFP32 | IC1 |
| 1 | MCP60x4 | SOIC-14 | U1 |
| 1 | HTU21D | HTU21D_QFN | U2 |
| 1 | PIR | PIR | U3 |
| 1 | TPS79718 | SC70 | U4 |
| 1 | EPL3015 | EPL3015 | U5 |
| 1 | TPS61222 | TPS6122x | U6 |
| 1 | AO3401 | SOT23 | Q1 |
| 2 | NMosfetGen | SOT23 | Q2, Q3 |
| 1 | Q_NMOS_GSD | SOT23 | Q4 |
| 1 | CONN_02X04 | Pin_Header_Straight_2x04_SMD | P1 |
| 1 | CONN_02X04 | Pin_Header_Straight_2x04_TH | P2 |
| 1 | CONN_01X02 | ConnWago_2059_2P_SMD | P3 |
| 2 | SW_PUSH | MicroSwitch_6x6mm | SW1, SW2 |
| 1 | LED | R_1206 | D1 |
| 1 | PhotoDiode | PD638C | D2 |
| 6 | 10uF | R_0805 | C1, C11, C12, C15, C19, C20 |
| 2 | 1uF | R_0805 | C2, C8 |
| 10 | 100nF | R_0805 | C3, C4, C5, C6, C7, C9, C10, C13 +2 |
| 1 | 0.1uF | R_0805 | C17 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.47uF | R_0805 | C18 |
| 7 | 10k | R_0603 | R1, R2, R3, R7, R9, R18, R19 |
| 1 | 475 | R_0603 | R4 |
| 1 | 3600 | R_0603 | R5 |
| 3 | 100k | R_0603 | R6, R14, R20 |
| 6 | 1M | R_0603 | R8, R10, R11, R12, R15, R16 |
| 1 | 47k | R_0603 | R13 |
| 1 | 1.6M | R_0603 | R17 |
Sensor design files
The KiCad project lives in the pluyckx/SensorPcb repository on GitHub; these links point at the commit this page was built from.
- LayoutSensor.kicad_pcb
Sensor: common questions
What microcontroller does the Sensor use?
The Sensor is built around the STM32L051K8T6, from the STM32 family.
How big is the Sensor PCB?
The Sensor measures 49 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor?
58 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor design files?
From the pluyckx/SensorPcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sensor design in my own project?
The repository has no license, so all rights stay with pluyckx. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in SensorPcb
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k