8 open source boards using the HTU21D

Real designs built with the HTU21D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the HTU21D

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the HTU21D connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
  • The DATA pin has a pull-up to 3.3V on 4 of 7 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SCK pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
DATApin 1Connected to: The microcontroller 57%
  • Pull-up to 3.3V on 57% · 10 kΩ (3), 4.7 kΩ (1)
GNDpin 2Connected to: GND 100%
NCpin 3, 4Connected to: Not connected 86%
VDDpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (7)
SCKpin 6Connected to: The microcontroller 67%
  • Pull-up to 3.3V on 67% · 10 kΩ (3), 4.7 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Node-RED-Energy-Harvesting dashboard by ldab, OpenWeatherStation by VitalSeptfonds, Teapot by cillian64 and Lora-Puck by MohamadAminGhanoum.

The HTU21D in open source designs

The gallery holds 8 open source boards using the HTU21D from 7 GitHub repositories; a typical one measures about 60 × 53 mm and carries around 52 components.

88% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Node-RED-Energy-Harvesting dashboard by ldab.

Microcontrollers on boards using the HTU21D

HTU21D: common questions

Where can I find a HTU21D reference design?

Each of the 8 boards on this page is a real design using the HTU21D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the HTU21D VDD pin?

The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the HTU21D.

What pull-up resistor is used on the HTU21D DATA pin?

The DATA pin has a pull-up to 3.3V on 4 of 7 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the HTU21D.

What pull-up resistor is used on the HTU21D SCK pin?

The SCK pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the HTU21D.

Which microcontrollers do boards using the HTU21D use?

Most are built on STM32 (4), ESP32 (2) and RP2040/RP2350 (1).

How big is a typical board using the HTU21D?

The median is 60 × 53 mm, and 88% are two-layer designs.

What is the most popular open source board using the HTU21D?

By GitHub stars, Node-RED-Energy-Harvesting dashboard by ldab, with 11 stars.

Can I simulate one of these boards using the HTU21D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part