Imagescribbler
About the Imagescribbler PCB
Imagescribbler is an open source PCB design by polpo, published on GitHub under the CC0-1.0 license. It is a board, with 48 components from 20 distinct parts.
Other key parts include the W65C02S6TPG-14, Z8530, AT28C64B-15PU, AS6C6264-55PCN and SN74HCT374N. By type, the board carries 18 ICs, 18 capacitors, 4 jumpers, 3 resistors and 1 connector.
From the project
A Clone of Apple's ImageWriter II/LQ LocalTalk Option card
The ImageScribbler LocalSquawk option is a 1:1 clone of Apple's ImageWriter II/LQ LocalTalk Option card, with a few extra enhancements to make building one easier. It works and behaves in exactly the same way as Apple's original card.
This card can be used in an Apple ImageWriter II or LQ printer to enable LocalTalk networking.
Since this is a clone of an existing device, it's licensed CC0. Do whatever you want with it!
Main components on the Imagescribbler
Imagescribbler bill of materials (BOM)
48 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W65C02S6TPG-14 65C02 | DIP-40_W15.24mm | U1 |
| 1 | Z8530 | DIP-40_W15.24mm | U2 |
| 1 | AT28C64B-15PU 2764 | DIP-28_W15.24mm | U3 |
| 1 | AS6C6264-55PCN 6264 | DIP-28_WW7.62mm-15.24mm | U4 |
| 3 | SN74HCT374N 74HCT374 | DIP-20_W7.62mm | U5, U6, U7 |
| 1 | SN74HCT245N 74HCT245 | DIP-20_W7.62mm | U8 |
| 1 | SN74AHCT138N 74AHCT138 | DIP-16_W7.62mm | U9 |
| 1 | CD74HCT367E 74HCT367 | DIP-16_W7.62mm | U10 |
| 2 | SN74HCT74N 74HCT74 | DIP-14_W7.62mm | U11, U15 |
| 1 | CD74HCT32E 74HCT32 | DIP-14_W7.62mm | U12 |
| 2 | CD74HCT00E 74HCT00 | DIP-14_W7.62mm | U13, U14 |
| 1 | CD74HCT112E 74HCT112 | DIP-16_W7.62mm | U16 |
| 1 | ECS-100AX-036 3.6864MHz | Oscillator_DIP-8-14 | U17 |
| 1 | X2444 | DIP-8_W7.62mm | U18 |
| 1 | HIF3FB-26DA-2.54DSA(71) Conn_02x13_Odd_Even | PinSocket_2x13_P2.54mm_Vertical | P1 |
| 4 | R6413-00 MountingHole | H1, H2, H3, H4 | |
| 4 | Open | Jumper_1x02_P2.54mm_Vertical-SolderBridge | JP1, JP2, JP3, JP4 |
| 17 | FG28X7R1H104KNT06 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +9 |
| 1 | ECE-A1CKS100I 10uF | CP_Radial_D6.3mm_P2.50mm | C18 |
| 3 | CFR-12JB-52-10K 10KΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
Imagescribbler design files
The KiCad project lives in the polpo/imagescribbler repository on GitHub; these links point at the commit this page was built from.
- Schematiclt-option-clone.kicad_sch
- BOMbom.csv
Imagescribbler: common questions
How many components are on the Imagescribbler?
48 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Imagescribbler design files?
From the polpo/imagescribbler repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Imagescribbler design in my own project?
Yes, under the terms of its CC0-1.0 license, which polpo chose for the repository.