11 open source boards using the AT28C64B-15PU
Real designs built with the AT28C64B-15PU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
8 16 computer 2
halfburnttoast
208 × 110 mm111 parts2LNo license21- schematic only · 48 parts
Imagescribbler
polpo
48 partsCC0-1.014 CoCoTANG
lfantoniosi
69.1 × 56.6 mm108 parts2LNo license18-bit computer
dragonruler1000
414 × 187.5 mm331 parts6LMIT0RP2040/RP2350
6502
lolakkalol
648.5 × 231.5 mm57 parts2LNo license08-Bit To BDC V2
Alex-Hermeling
100 × 50 mm51 parts2LNo license2VideoBoard
Cptscorcher
143 × 175 mm51 parts2LGPL-3.00Memory
georgesleen
98.8 × 50.1 mm28 parts4LNo license0MemoryModule
crempp
197.8 × 80 mm97 parts2LNo license4RP2040/RP2350
EEPROM Programer
Alex-Hermeling
77 × 60 mm3 parts2LNo license2Rom
lorenzonotaro
65.5 × 77 mm7 parts2LNo license8
How designs wire the AT28C64B-15PU
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the AT28C64B-15PU connects to, and the resistors, capacitors and other passives placed on it.
- The NC_1 pin is left unconnected on 9 of 9 designs.
- The NC_2 pin is left unconnected on 9 of 9 designs.
- The WE pin is tied to VCC on 7 of 9 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 100% | — |
| GNDpin 14 | Connected to: GND 89% | — |
| NC_2pin 26 | Connected to: Not connected 100% | — |
| WEpin 27 | Connected to: VCC 78% · a signal 22% | — |
| VCCpin 28 | Connected to: 5V 89% |
|
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8 16 computer 2 by halfburnttoast, Rom by lorenzonotaro, MemoryModule by crempp and 8-Bit To BDC V2 by Alex-Hermeling.
The AT28C64B-15PU in open source designs
The gallery holds 11 open source boards using the AT28C64B-15PU from 10 GitHub repositories; a typical one measures about 121.5 × 78.5 mm and carries around 51 components.
80% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is 8 16 computer 2 by halfburnttoast.
Parts used alongside the AT28C64B-15PU
Microcontrollers on boards using the AT28C64B-15PU
What boards using the AT28C64B-15PU are built for
AT28C64B-15PU: common questions
Where can I find a AT28C64B-15PU reference design?
Each of the 11 boards on this page is a real design using the AT28C64B-15PU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AT28C64B-15PU NC_1 pin connected?
The NC_1 pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the AT28C64B-15PU.
How is the AT28C64B-15PU NC_2 pin connected?
The NC_2 pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the AT28C64B-15PU.
How is the AT28C64B-15PU WE pin connected?
The WE pin is tied to VCC on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the AT28C64B-15PU.
What parts are used alongside the AT28C64B-15PU?
The 74LS173, 74HC14, 74HCT02, 74LS00 and 74LS04 appear in the most repositories here.
Which microcontrollers do boards using the AT28C64B-15PU use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the AT28C64B-15PU?
The median is 121.5 × 78.5 mm, and 80% are two-layer designs.
What is the most popular open source board using the AT28C64B-15PU?
By GitHub stars, 8 16 computer 2 by halfburnttoast, with 21 stars.
Can I simulate one of these boards using the AT28C64B-15PU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.