Current mirror
Polymorphic548·EDC_project·PCB layout/current_mirror.kicad_pcb
About the Current mirror PCB
Current mirror is an open source PCB design by Polymorphic548, published on GitHub. It is a 2-layer board measuring 78 × 67 mm, with 18 components from 18 distinct parts.
By type, the board carries 7 resistors, 4 connectors, 4 diodes, 2 transistors and 1 capacitor.
It belongs with the test & measurement designs in this gallery.
From the project
Open dualcurrentmirror.kicadpro / dualcurrentmirror.kicadpcb for the complete two-copy panel. currentmirror.kicadpro remains the reusable single 78 x 67 mm unit. KiCad 10.0.7 or later is required. In PCB Editor, press Alt+3 for 3D. The shared project-local library is Project.pret
Open dualcurrentmirror.kicadpro / dualcurrentmirror.kicadpcb for the complete two-copy panel. currentmirror.kicadpro remains the reusable single 78 x 67 mm unit. KiCad 10.0.7 or later is required. In PCB Editor, press Alt+3 for 3D. The shared project-local library is Project.pretty via fp-lib-table.
The earlier six TP pads are removed. Every copy now has one power header and three measurement headers, all 1x2 male, 2.54 mm pitch, with 2 mm copper pads and 1 mm drills. Solder the pins on the copper side; attach female jumper leads above. Pads/holes are still needed to solder the pins. Do not…
Current mirror bill of materials (BOM)
18 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N3904 | Q1_ETCH | Q1 |
| 1 | 2N3904 | Q2_ETCH | Q2 |
| 1 | 9.8V INPUT | J1_ETCH | J1 |
| 1 | RLOAD VOLTAGE | J2_ETCH | J2 |
| 1 | Q1 BASE-EMITTER | J3_ETCH | J3 |
| 1 | Q2 BASE-EMITTER | J4_ETCH | J4 |
| 1 | 1N4148 | D1_ETCH | D1 |
| 1 | 1N4148 | D2_ETCH | D2 |
| 1 | BZX55C5V1 | D3_ETCH | D3 |
| 1 | 1N4007 | D4_ETCH | D4 |
| 1 | 1.33n / >=25V | C1_ETCH | C1 |
| 1 | 1R (LT F1) | R1_ETCH | R1 |
| 1 | 662R (LT Rs) | R2_ETCH | R2 |
| 1 | 1k (LT R1a) | R3_ETCH | R3 |
| 1 | 22R (LT Re1) | R4_ETCH | R4 |
| 1 | 22R (LT Re2) | R5_ETCH | R5 |
| 1 | 1k (LT Rload) | R6_ETCH | R6 |
| 1 | 120R (117.6R measured) | R7_ETCH | R7 |
Current mirror design files
The KiCad project lives in the Polymorphic548/EDC_project repository on GitHub; these links point at the commit this page was built from.
Current mirror: common questions
How big is the Current mirror PCB?
The Current mirror measures 78 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Current mirror?
18 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Current mirror design files?
From the Polymorphic548/EDC_project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Current mirror design in my own project?
The repository has no license, so all rights stay with Polymorphic548. Use it as a reference, and ask the author before reusing the design.
More boards in EDC_project
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528