HardLabs

FOSSDAQ

prfpeste·FOSSDAQ·modules/ai-8x-0to3v3/hardware/kicad/ai-8x-0to3v3.kicad_sch

This repository ships a schematic but no board layout.

About the FOSSDAQ PCB

FOSSDAQ is an open source AVR/Arduino PCB design by prfpeste, published on GitHub. It is a board, with 8 components from 5 distinct parts.

Its main chip is the Arduino_Nano_33_BLE_Sense_R2_Socket, from the AVR/Arduino family. Other key parts include the LM2596S-5V. By type, the board carries 6 connectors, 1 IC and 1 module.

It belongs with the test & measurement designs in this gallery.

From the project

Free and Open Source Data Acquisition

Main components on the FOSSDAQ

LM2596S-5VArduino_Nano_33_BLE_Sense_R2_Socket

FOSSDAQ bill of materials (BOM)

8 components, 5 distinct parts.

QtyPartRefs
1
LM2596S-5V
U5
1
Arduino_Nano_33_BLE_Sense_R2_Socket
A1
1
Conn_01x02_Pin 24V
J6
4
AST0250604
J10, J11, J13, J14
1
Conn_01x02_Socket
J12

FOSSDAQ design files

The KiCad project lives in the prfpeste/FOSSDAQ repository on GitHub; these links point at the commit this page was built from.

FOSSDAQ: common questions

What microcontroller does the FOSSDAQ use?

The FOSSDAQ is built around the Arduino_Nano_33_BLE_Sense_R2_Socket, from the AVR/Arduino family.

How many components are on the FOSSDAQ?

8 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the FOSSDAQ design files?

From the prfpeste/FOSSDAQ repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the FOSSDAQ design in my own project?

The repository has no license, so all rights stay with prfpeste. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FOSSDAQ without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards