TriacControl
profdc9·TriacControl
About the TriacControl PCB
TriacControl is an open source PCB design by profdc9, published on GitHub. It is a 2-layer board measuring 100 × 53 mm, with 48 components from 25 distinct parts.
Other key parts include the MOC3023 and PC817. By type, the board carries 25 resistors, 6 jumpers, 4 connectors, 4 diodes, 4 capacitors and 3 ICs.
From the project
Triac Phase Controlled by analog / PWM signal
This is an optoisolated triac motor speed controller where the phase control of the motor AC signal may be controlled by an analog or PWM signal. Typically, a universal motor tool such as a drill or a router could have it's speed varied this way. A PWM signal would usually be supplied by a microcontroller. This motor speed control is open-loop and you have to add a tachometer if you want to be able to vary the motor speed to achieve a particular rotation rate.

Main components on the TriacControl
TriacControl bill of materials (BOM)
48 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOC3023 | DIP-6_W7.62mm_Socket | U1 |
| 2 | PC817 | DIP-4_W7.62mm | U2, U3 |
| 1 | BTA24-600B | TO-220-3_Vertical | Q1 |
| 1 | 2N2907 | TO-92_Inline_Wide | Q2 |
| 1 | AC LINE | TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | LOAD | TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | ZEROCROSS | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | PWM | TerminalBlock_bornier-2_P5.08mm | J4 |
| 6 | Pinhead | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP5, JP6, JP7 |
| 4 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 1 | 100 nF, 400 V | C_Rect_L10.0mm_W2.5mm_P7.50mm_MKS4 | C1 |
| 1 | 47 uF | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 22 uF | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 10 uF | CP_Radial_D5.0mm_P2.50mm | C4 |
| 8 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R21, R22 |
| 1 | NC | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 3 | 220k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15 |
| 1 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 2 | 3k3 | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R17, R18 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 820R | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R19 |
| 2 | 47R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23, R25 |
| 1 | 4R7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R26 |
| 1 | 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R27 |
TriacControl design files
The KiCad project lives in the profdc9/TriacControl repository on GitHub; these links point at the commit this page was built from.
- LayoutTriacControl.kicad_pcb
- SchematicTriacControl.kicad_sch
TriacControl: common questions
How big is the TriacControl PCB?
The TriacControl measures 100 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TriacControl?
48 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the TriacControl design files?
From the profdc9/TriacControl repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TriacControl design in my own project?
The repository has no license, so all rights stay with profdc9. Use it as a reference, and ask the author before reusing the design.