Healthypi 6 display v7

Protocentral·protocentral_healthypi6_hardware·hardware/healthypi_6_display_v7/healthypi_6_display_v7.kicad_pcb

Healthypi 6 display v7 PCB layout, top view — open source board by Protocentral

About the Healthypi 6 display v7 PCB

Healthypi 6 display v7 is an open source PCB design by Protocentral, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 60 × 33 mm, with 14 components from 10 distinct parts.

Other key parts include the TPS61158DRVR. By type, the board carries 5 resistors, 4 capacitors, 3 connectors, 1 IC and 1 inductor.

It belongs with the displays & leds designs in this gallery.

From the project

Open hardware design files for HealthyPi 6 — STM32H757 vital-signs monitor with the HealthyLink modular expansion bus

- 24-way FFC to the main board: 2-lane MIPI-DSI, touch I²C (TPSCL / TPSDA, TPINT, TPRST), panel reset and tearing-effect (MIPIRST, MIPITE) - TPS61158 boost driving the panel backlight, enabled by MIPIBKL` - 12-way connector to the display panel

Main components on the Healthypi 6 display v7

Healthypi 6 display v7 bill of materials (BOM)

14 components, 10 distinct parts.

Qty	Part	Footprint	Refs
1	TPS61158DRVR	DRV6_1P6X1_TEX_38825256	U1
1	Conn_01x06_Socket	TE_2328702-6	J5
1	5047543120	TE_3-2328724-1	J6
1	GCT_FFC2A32-24-T	FFC2B3524T	J7
1	VLS3012ET-220M	L_Sunlord_SWPA3012S	L2
1	2.2uF	C_0402_1005Metric	C1
2	1uF	C_0402_1005Metric	C3, C4
1	100nF	C_0402_1005Metric	C5
1	10R	R_0402_1005Metric	R1
4	10K	R_0402_1005Metric	R2, R3, R4, R5

Healthypi 6 display v7 design files

The KiCad project lives in the Protocentral/protocentral_healthypi6_hardware repository on GitHub; these links point at the commit this page was built from.

Healthypi 6 display v7: common questions

How big is the Healthypi 6 display v7 PCB?

The Healthypi 6 display v7 measures 60 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Healthypi 6 display v7?

14 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Healthypi 6 display v7 design files?

From the Protocentral/protocentral_healthypi6_hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Healthypi 6 display v7 design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which Protocentral chose for the repository.

More boards in protocentral_healthypi6_hardware

Similar boards