PRS relay board
prtana·power-relay-switcher·hardware/PRS_relay_board/KiCad/PRS_relay_board.kicad_pcb
About the PRS relay board
PRS relay board is an open source STM32 PCB design by prtana, published on GitHub under the MIT license. It is a 4-layer board measuring 160 × 137 mm, with 111 components from 31 distinct parts.
Its main chip is the STM32L062K8Tx, from the STM32 family. Other key parts include the STCN75, 74LVC125AD,118, USBLC6-2SC6 and UA78M33CKVURG3. By type, the board carries 44 resistors, 19 capacitors, 9 diodes, 8 switches, 6 transistors and 6 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Power Relay Switcher is an electronic device consisting of 4 relays, each of which is capable of switching loads of up to 20 A, 240 V AC or 28 V DC. Each of the four relays can be manually closed/opened from the front panel or via USB using SCPI commands.
Power Relay Switcher is an electronic device consisting of 4 relays, each of which is capable of switching loads of up to 20 A, 240 V AC or 28 V DC. Each of the four relays can be manually closed/opened from the front panel or via USB using SCPI commands.
The device was designed for the automation of running battery pack management unit learning cycles for batteries up to a capacity of 200 Ah. In that application it is to be used in conjunction with a power supply, an electronic load and a multimeter. These battery learning cycles require charging-resting-discharging-resting periods in…
Main components on the PRS relay board
PRS relay board bill of materials (BOM)
111 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STCN75 | SOP65P490X110-8N | U1 |
| 1 | STM32L062K8Tx | LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | 74LVC125AD,118 | SOIC127P600X175-14N | U3 |
| 1 | USBLC6-2SC6 | SOT95P280X145-6N | U4 |
| 1 | UA78M33CKVURG3 | TPS7A6533QKVURQ1 | U5 |
| 5 | PMV37ENEA | SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q6 |
| 1 | BC848 | SOT-23_Handsoldering | Q5 |
| 2 | 691313410004 | 691313410004 | J1, J2 |
| 1 | UJ2-BH-2-TH | CUI_UJ2-BH-2-TH | J3 |
| 1 | FTSH-105-01-F-DV-K-P | FTSH-105-XX-YYY-DV-K-P | J4 |
| 1 | 10-32-1031 | SHDR3W114P0X508_1X3_1416X1140X1425P | J5 |
| 1 | B3B-XH-A | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 4 | 1-1393210-3 | TE_1-1393210-3 | K1, K2, K3, K4 |
| 1 | RAC10-12SK/277 RAC10-12SK_277 | RAC10-12SK_277 | PS1 |
| 4 | ERZE11A431 | RV_Disc_D12mm_W6.3mm_P7.5mm | RV1, RV2, RV3, RV4 |
| 8 | 100SP1T2B4M7RE | 100SP1T2B4M7RE | S1, S2, S3, S4, S5, S6, S7, S8 |
| 4 | 553-0122F | 5530122F | LED1, LED2, LED3, LED4 |
| 4 | MM3Z24VST1G | D_SOD-323 | D1, D3, D5, D7 |
| 5 | MMBD7000HC | SOT-23_Handsoldering | D2, D4, D6, D8, D9 |
| 1 | BLM18HE601SN1D | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C6, C7, C8, C9 +8 |
| 1 | 330n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 6 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R10, R11 |
| 8 | 220R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R13, R14, R15, R25, R26, R27, R32 |
| 8 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R16, R17, R28, R29, R33, R34 |
| 15 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R12, R18, R19, R24, R30, R31 +7 |
| 4 | 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R22, R23 |
| 1 | - | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R41 |
| 2 | 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R42, R43 |
PRS relay board design files
The KiCad project lives in the prtana/power-relay-switcher repository on GitHub; these links point at the commit this page was built from.
PRS relay board: common questions
What microcontroller does the PRS relay board use?
The PRS relay board is built around the STM32L062K8Tx, from the STM32 family.
How big is the PRS relay board?
The PRS relay board measures 160 × 137 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PRS relay board?
111 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the PRS relay board design files?
From the prtana/power-relay-switcher repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PRS relay board design in my own project?
Yes, under the terms of its MIT license, which prtana chose for the repository.
Can I test firmware for the PRS relay board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k